A、 Perform a test to identify the source of data transmission from the management unit.
B、 Perform a test to determine if the management unit is transmitting the data.
C、 Conduct a test to confirm that the management unit does not transmit the data.
答案:B
A、 Perform a test to identify the source of data transmission from the management unit.
B、 Perform a test to determine if the management unit is transmitting the data.
C、 Conduct a test to confirm that the management unit does not transmit the data.
答案:B
A. 在描述飞机行李舱时,应给出装载提示。
B. 在描述飞机行李舱时,应给出压力提示。
C. 在描述飞机行李舱时,应给出加载提示。
A. Each section shall be started on a right-hand page.
B. Each section shall be stated on a left-hand page.
C. Each section shall be proceeded from a right-hand column.
A. If the drain hole is blocked,clean it.
B. If the drain hole is leaked,clean it.
C. If the drain hole is locked,clean it.
A. Fuel sample was checked for contamination of microorganism.
B. Contamination to microorganism was detected in the fuel sample.
C. Fuel sample check reveals positive contamination of microorganism growth.
A. APU start attempts are inhibited above 25,000 feet with both busses off,only one start attempt is allowed below 25000 feet.
B. With both busses power off,APU start attempts is recommended above 25000 feet and only one start could be accepted below 25,000 feet.
C. APU start attempts are not recommended above 25,000 feet.With both busses off,only one start attempt is recommended below 25,000 feet.
A. The routing of the cable loom may have been altered by the installation.
B. The routing of the cable loom may have been held by the installation.
C. The routing of the cable loom may have been defended by the installation.
A. Check the defect before you start the procedure again.
B. Rectify the defect before you start the procedure again.
C. Define the defect before you start the procedure again.
A. Do not jar the instruments
B. Do not pivot the instruments
C. Do not shake the instruments
A. Transport the part to the overhaul shop.
B. Transport the part to the maintenance shop.
C. Remove the part to the overhaul shop.
A. 限制提供飞机系统或设备的提供,例如,限制防冰系统的加热元件或电池温度。
B. 应对飞行设备,特别是防冰系统的加热元件,以及电池的温度进行限制。
C. 应提供所有飞机系统或设备的限制信息。例如,与防冰系统或电瓶温控系统中所用的电加热元件相关的限制信息。