1803.This will allow the user to identify an affected airplane by examining one list rather than having to check each individual Continuing Airworthiness Program for applicability.

A. Use the marks on the bellcrank and shaft to identify them and prevent incorrect installation.

B. Mark the bellcrank and shaft so that they'll be identified and incorrect installation will not occur.

C. Put marks on the bellcrank and shaft or incorrect installation will occur.

A. 使用油漆过多将导致漆面不符合要求。

B. 如果你使用太多的计划,完成将是不理想的。

C. 如果你使用太多的墨水,完成将是不满意的。

A. If there is no approval of the FAA Oversight Office that manages the airplane model Type Certificate,anyone cannot change or delete these inspection features that are compulsive.

B. These inspection features can be changed or deleted if they don't get approval of the FAA Oversight Office that is responsible for the airplane model Type Certificate because they are mandatory.

C. If changing or deleting of these inspection features is approved by the FAA Oversight Office that manages the airplane model Type Certificate,they are mandatory.

A. 可参考的技术文件必须包含如勤务通告、勤务信件等。

B. 勤务通告、勤务信函包含在技术参考文件清单中。

C. 技术参考文件包括必要的文件清单,如服务通告、服务信函等。

A. 如果不遵守特殊预防措施,机械员打开舱门时很容易造成站在门附近的人员受伤。

B. 打开车门的机械员没有遵守规舱定的安全预防措施,造成了站在附近的人员受伤。

C. 机械员在未遵守规定的安全预防措施的情况下打开舱门,很容易造成站在舱门附近的人员受伤。

A. 我们在这个产品中不使用添加剂。

B. 我们不使用附属产品。

C. 我们在此生产过程中不使用粘接剂

A. The temperature can be increased by decreasing the cure time.

B. Decreasing the cure time that can increase the temperature.

C. Increase the temperature to decrease the cure time.

A. When you move the alternate nose wheel steering switch to the alternate position,the landing gear transfer valve moves to the alternate position.The landing gear transfer valve moves the pressure source for the landing gear retraction and the nose wheel

B. When move the alternate switch to steer the nose wheel to the alternate position,the landing gear transfer valve moves to the alternate position.The landing gear transfer valve moves the pressure source from hydraulic system A to hydraulic system B duri

C. When moving the alternate nose wheel steering switch to the alternate position,the landing gear transfer valve moves to the alternate position.The landing gear transfer valve removes the pressure source from the landing gear retraction and the nose wheel.

A. This procedure gives you the disassembly process.

B. You can find the procedures for disassembling in this section.

C. The assembly process can be found in this section.

A. 不要拧松螺母使其对准。

B. 不要拧紧螺母使其对齐。

C. 不要松动螺栓使其对准。