A、 The FAA-Approved Airworthiness Limitations shall be prepared as a separate document for inclusion in the Maintenance Manual and for insertion in the “Limitations Section” of the Pilot's Operating Handbook.
B、 FAA-approved Airworthiness Restrictions should be prepared as a separate document and included in the “Restrictions Section” of the Maintenance Manual and the Pilot’s Operating Manual.
C、 The airworthiness restrictions approved by FAA should be prepared as separate documents and included in the "Limitations" section of the Maintenance Manual and the "Pilot Operations Manual".
答案:A
A、 The FAA-Approved Airworthiness Limitations shall be prepared as a separate document for inclusion in the Maintenance Manual and for insertion in the “Limitations Section” of the Pilot's Operating Handbook.
B、 FAA-approved Airworthiness Restrictions should be prepared as a separate document and included in the “Restrictions Section” of the Maintenance Manual and the Pilot’s Operating Manual.
C、 The airworthiness restrictions approved by FAA should be prepared as separate documents and included in the "Limitations" section of the Maintenance Manual and the "Pilot Operations Manual".
答案:A
A. Retesting and reviewing test results are optional due to discrepancies in the fuel/water sample and the ability of the detection kits to continuously measure the level of microbial growth.
B. It is very important to do the test again and confirm test results because of differences in the fuel/water sample and the ability of the detection kits to continuously measure the level ofmicrobial growth.
C. It is mandatory to retest and evaluate test results to make sure the differences in the fuel/water sample and the ability of the detection kits to witness the level of microbial growth.
D. C.It is mandatory to retest and evaluate test results to make sure the differences in the fuel/water sample and the ability of the detection kits to witness the level of microbial growth.
A. 小心地取出配平盖板内的备份磁带。
B. 小心地从胶带上拆除装饰盖。
C. 小心地移除调整片,用其他的带子盖上。
A. The safety procedures are supplied by the manufacturer.
B. Safety procedures are to be supplied to the manufacturer.
C. Safety procedures are provided for manufacturers to follow.
A. Ground service bus has no power,but the external power can be supplied.
B. Ground service bus is not energized with external power.
C. Ground service bus ispower off when external power is supplied.
A. 笔记本电脑有以下主要部件
B. 笔记本电脑有以下初级部件
C. 笔记本电脑有以下仿制部件
A. 到达行程末端后作动筒中的微小电门会衔接。
B. 在旅程结束后作动筒中的微小电门会断开。
C. 到达行程末端后作动筒中的微动电门断开。
A. 4 个轴承支撑 N2 轴的后部。
B. 第 4 号轴承支撑 N2 轴的后部。
C. 第 4 号轴承支持 N2 轴的前部。
A. Maximum Landing Weight is maximum weight supplied for the landing contact.
B. Minimum Landing Weight is minimum weight provided for the landing touchdown.
C. Maximum Landing Weight is maximum weight approved for the landing touchdown.
A. Propellers must be overhauled in a satisfactory shop which should be supplied by the propeller manufacturer in accordance with data.
B. Overhaul of propellers and the shop must meet the data of the propeller manufacturer.
C. Overhaul of propellers must be accomplished in a qualified shop in accordance with data supplied by the propeller manufacturer.