A、 The manufacturer may choose to include information on Unscheduled Maintenance Checks,including Time Limits/Inspections and Maintenance Checks,in a separate manual.Reference points must be listed in the maintenance manual.
B、 For Unscheduled Maintenance Checks,the manufacturer will have the choice to separate the information of Time Limits/Inspections and Maintenance Checks in manuals.The manual can be the Maintenance Manual.
C、 The information on Unscheduled Maintenance Checks should be provided in the Maintenance Manual including Time Limits/Inspections and Maintenance Checks.Whether to include these information in an other manual is at the manufacturer's option.
答案：C
A、 The manufacturer may choose to include information on Unscheduled Maintenance Checks,including Time Limits/Inspections and Maintenance Checks,in a separate manual.Reference points must be listed in the maintenance manual.
B、 For Unscheduled Maintenance Checks,the manufacturer will have the choice to separate the information of Time Limits/Inspections and Maintenance Checks in manuals.The manual can be the Maintenance Manual.
C、 The information on Unscheduled Maintenance Checks should be provided in the Maintenance Manual including Time Limits/Inspections and Maintenance Checks.Whether to include these information in an other manual is at the manufacturer's option.
答案：C
A. 温度降低,钢索的拉力会减小。
B. 钢索上的张力会随着温度升高而增加。
C. 温度升高,钢索张力会减小。
A. Finish stage 1 to 4 to ensure that no axial force is derived from the rod.
B. Do steps 1 thru 4 to make sure that no axial load is applied on the rod.
C. Procedures 1 to 4 are designed to check if the rod exerts axial force.
A. 仔细检查组件来确定是否有进一步的损坏。
B. 目视检查组件来确定损坏的部位。
C. 目视检查组件来确定损坏的程度。
A. Write the instructions in the mandatory mode.
B. Write the instructions in the imperative form.
C. Write the instructions in the active mode.
A. 制造商可以忽略不适用于其产品的系统。
B. 厂家不能省略适用于其产品的系统。
C. 生产商可以选择其产品的相应系统
A. This system is used to assist or avoid the formation of ice on masts and fairings.
B. This system is used to eliminate or prevent the formation of ice on antennas and radomes.
C. This system is used to get rid of or escape the formation of ice on probes and domes.
A. The portion of the systemis used to eliminate or prevent ice forming in air exhaust surroundings,including air flow anti-icing on the power plant.
B. The portion of the systemis used to get rid of or facilitate the gathering of ice in or around air intakes,including power plant protector ice control.
C. The portion of the systemis used to eliminate or prevent the formation of ice in or around air intakes,including power plant cowling anti-icing.
A. 氧气系统包括氧气瓶、释压阀、关断阀、出气口、调节器、面罩等。
B. 供氧系统包括氧气瓶、释放阀、截止阀、排气口、监管者、面罩等。
C. 供氧系统包括氧气瓶、开关阀、切断阀、紧急出口、调节器、面罩等。
A. 系统由多个部件组成时,如防冰系统由螺旋桨除冰带、机翼和尾翼除冰带或加热的空速静压口等组成,因为各项设备均须获得 FAA 批准并单独销售,所以可以为此类各个部件提供“补充程序”。
B. 由数个组件组成的系统,如防冰系统,每个组件可能都有“补充程序”,如螺旋桨靴、机翼和尾翼靴或加热空速静态源,如果设备是 FAA 批准的组件并单独销售。
C. 由多部件组成的系统,如防冰系统,如果设备是经 FAA 批准并单独销售的,可为每个部件提供“补充程序”,如螺旋桨套、机翼和尾翼套,或加温速度静态源。
D. B.由数个组件组成的系统,如防冰系统,每个组件可能都有“补充程序”,如螺旋桨靴、机翼和尾翼靴或加热空速静态源,如果设备是 FAA 批准的组件并单独销售。
E. C.由多部件组成的系统,如防冰系统,如果设备是经 FAA 批准并单独销售的,可为每个部件提供“补充程序”,如螺旋桨套、机翼和尾翼套,或加温速度静态源。
A. 如果没有污染物,重新开始操作。
B. 如果那里无异物,重新开始操作。
C. 重新开始操作后,无污染物。
