A、 If there is no approval of the FAA Oversight Office that manages the airplane model Type Certificate,anyone cannot change or delete these inspection features that are compulsive.
B、 These inspection features can be changed or deleted if they don't get approval of the FAA Oversight Office that is responsible for the airplane model Type Certificate because they are mandatory.
C、 If changing or deleting of these inspection features is approved by the FAA Oversight Office that manages the airplane model Type Certificate,they are mandatory.
答案：A
A、 If there is no approval of the FAA Oversight Office that manages the airplane model Type Certificate,anyone cannot change or delete these inspection features that are compulsive.
B、 These inspection features can be changed or deleted if they don't get approval of the FAA Oversight Office that is responsible for the airplane model Type Certificate because they are mandatory.
C、 If changing or deleting of these inspection features is approved by the FAA Oversight Office that manages the airplane model Type Certificate,they are mandatory.
答案：A
A. Ensure that the parts bond correctly by applying pressure on the base of the patch.
B. Apply weight to the patch surface to ensure a correct bond between the parts.
C. Do not put pressure on the surface of the patch,as it is unnecessary for proper bonding.
A. Make sure that the parts or surface layer are dry and free from uncontamination.
B. Make sure that the parts or surface layer are dry and free from contamination.
C. Make sure that the parts or surface lamination are dry and free from contamination.
A. Guarantee a consistent performance of the probe.
B. Maintain an uninterrupted movement of the probe.
C. To ensure continuous movement,the probe must be kept in motion.
A. Rise the cylinder up its install position.
B. Lift the cylinder above its installed position.
C. Lift the bushings above its installing position.
A. Warning is an operating procedure,inspection ,repair or maintenance practice ,which if not correctly followed,could result in personal injury ,or loss of life.
B. You should obey the warning in an operation procedure,check,repair or maintenance practice,otherwise person injury or death will happen.
C. Warning in an operation procedure,inspection ,repair or maintenance practice should be followed seriously,whereas may involve in personal injury ,or loss of life .
A. 小心地把阀门组装在其位置上,并安装封圈和螺栓。
B. 小心地把阀门组件放置到位,并安装垫片和螺栓。
C. 小心地把组件阀门放置到位,并安装垫片和螺帽。
A. To depressurize the braking system,operate the hand pump handle through its full travel.
B. To inflate the braking system,operate the hand pump handle through its full travel.
C. To bleed the braking system,operate the hand pump handle through its full travel.
A. 消耗燃油包括用于发动机启动、拖动、起飞、正常爬升、下降和 45 分钟备用的燃油。
B. 用于发动机启动、拖动、起飞、慢速爬升、下降和 45 分钟使用的燃油,即为消耗燃油。
C. 所需燃油包括用于发动机启动、滑行、起飞、正常爬升、下降和 45 分钟备用的燃油。
A. Examine the transformer of the floor panel.
B. Examine if the floor panel is laminated.
C. Examine the floor panel for deformation.
A. 预估所需要的数量。
B. 估计必须的清洗液数量。
C. 估计所需要的消耗量。
