A、 This Section shall be clearly stated and cross-referenced to the proper paragraph in Section 2 of the Handbook which consists of limitations.
B、 This Section contains limitations which shall be clearly stated and cross-referenced to the proper paragraph in Section 2 of the Handbook.
C、 The proper paragraph in Section 2 of the Handbook shall describe and cross-reference this Section included in this limitations.
答案:B
A、 This Section shall be clearly stated and cross-referenced to the proper paragraph in Section 2 of the Handbook which consists of limitations.
B、 This Section contains limitations which shall be clearly stated and cross-referenced to the proper paragraph in Section 2 of the Handbook.
C、 The proper paragraph in Section 2 of the Handbook shall describe and cross-reference this Section included in this limitations.
答案:B
A. If the pressure decreases quickly,the shear pins in the latch will break.
B. If the pressure reduces gradually,the shear pins in the lock will break.
C. If the pressure drops radically,the alignment pin in the lock will damages.
A. One or more separate documents for some types of equipment such as avionics and instrumentation may be required because they change frequently or they have various combinations.
B. Some types of equipment such as avionics and instrumentation are changed regularly or combined in different forms,requiring to have one or more separate documents.
C. Some types of equipment such as avionics and instrumentation are often revised or combined differently to require one or more separate documents.
A. This format may be used in integraor in part.
B. This format may be used in its entirety or in part.
C. This format may be used in its tacticallity or in part.
A. If the clearance dimension is not accurate,adjust the clearance dimension between the extend proximity sensor [44A] and the target [45].Some of the ducts in the air distribution system are wrapped with insulation material.
B. Adjust the clearance dimension between the extend proximity sensor [44A] and the target [45] in case of the clearance dimension is out of tolerance.Some of the ducts in the air distribution system are wrapped with non-conductive material .
C. Adjust the clearance dimension between the extend proximity sensor [44A] and the target [45] until the clearance dimension is out of range.Some of the ducts in the air distribution system are wrapped with compound material.
A. The rudder can be used in case of thrust asymmetry.
B. The vertical stabilizer can be used in case of throttle symmetry.
C. The rudder can be used in situations where thrust is symmetric.
A. 这项检查是用于当发动机出现渗漏时,检查部件和系统是否松动。
B. 该项检查能够发现发动机部件或系统是否有渗漏。
C. 该项检查用于在发动机低速运行时,检查发动机部件或系统是否有渗漏。
A. Ensure that the porosity is less than the specified error.
B. Ensure that the depth of the hole conforms to the specified value.
C. Make sure that the diameter of the hole is less than the specified value.
A. Make sure that the quality of fuel in the reservoir is not more than 500 liters.
B. Make sure that the quantity of fuel in the tank is not more than 500 liters.
C. Make sure that the quality of oil in the tank is not more than 500 liters.
A. Data and parameters are gathered by three computers from the systems and put together on the data link to the display unit.
B. Data and parameters are generated by three computers in the system and are displayed on the display unit through the data link.
C. After analyzing the data and parameters from the system,three computers send the final result to the data link for display.
A. 描述飞机失速警示系统或迎角系统时,手册应:(a)如果安装了其中任何一个,说明是否为必需设备。(b)说明操作原理。(c)说明检查和使用系统的方法。(d)阐述如何识别故障以及何时应依靠该系统。"
B. 描述飞机失速警告系统或迎角系统时,手册应:(a)如果安装了其中任何一个,说明其是否为必需设备。(b)说明其操作原理。(c)说明该系统的检查和使用方法。(d)阐述如何识别故障以及何时不依靠该系统。"
C. 描述飞机失速报警系统或迎角系统时,手册应:(a)如果安装了其中任何一个,说明是否为必需设备。(b)说明操作原理。(c)说明体系性检查和使用方法。(d)阐述如何识别故障以及何时不依靠该系统。
D. A.描述飞机失速警示系统或迎角系统时,手册应:(a)如果安装了其中任何一个,说明是否为必需设备。(b)说明操作原理。(c)说明检查和使用系统的方法。
E. A.描述飞机失速警示系统或迎角系统时,手册应:(a)如果安装了其中任何一个,说明是否为必需设备。(b)说明操作原理。(c)说明检查和使用系统的方法。(d)阐述如何识别故障以及何时应依靠该系统。"
F. B.描述飞机失速警告系统或迎角系统时,手册应:
G. B.描述飞机失速警告系统或迎角系统时,手册应:(a)如果安装了其中任何一个,说明其是否为必需设备。
H. B.描述飞机失速警告系统或迎角系统时,手册应:(a)如果安装了其中任何一个,说明其是否为必需设备。(b)说明其操作原理。
I. B.描述飞机失速警告系统或迎角系统时,手册应:(a)如果安装了其中任何一个,说明其是否为必需设备。(b)说明其操作原理。(c)说明该系统的检查和使用方法。