A、 To make sure that ATC transceivers are in standby mode,you must simulate altitude,otherwise false TCAS signals may occur intermittently.
B、 Make sure the ATC transmitters are in standby mode,or false TCAS targets may occur accidentally due to altitude simulation.
C、 Make sure that the ATC transponders are in standby mode when you simulate altitude.You can accidentally cause false TCAS targets.
答案：C
A、 To make sure that ATC transceivers are in standby mode,you must simulate altitude,otherwise false TCAS signals may occur intermittently.
B、 Make sure the ATC transmitters are in standby mode,or false TCAS targets may occur accidentally due to altitude simulation.
C、 Make sure that the ATC transponders are in standby mode when you simulate altitude.You can accidentally cause false TCAS targets.
答案：C
A. 中心句是一篇文章的第一句,也是最重要的一句。
B. 总结句是一节内容的第一句,也是最重要的一句。
C. 主题句是一段话的第一句,也是最重要的一句。
A. A pilot with certification authorized by Part 43 of the regulation can perform limited preventive maintenance.
B. According to Part 43 of the regulation,Apilot is certificated to perform limited preventative maintenance.
C. A certificated pilot is authorized by Part 43 of the regulation to perform limited preventivemaintenance.
D. C.A certificated pilot is authorized by Part 43 of the regulation to perform limited preventivemaintenance.
A. The wing tanks and the center tank have the same rate of supply of fuel.
B. The rate of supply of fuel from the wing tanks to the center tank is equal.
C. The fuel supply rate from all wing tanks and the center tank is the same.
A. 本规范将满足适用的政府监管要求。
B. 此指令符合适航官方要求。
C. 此规范适用于相关政府部门的要求。
A. Write notes only to give content,not commands.
B. Write notes only to give information,not instructions.
C. Write cautions only to give information,not orders.
A. Slowly and fully extend the RAT and make sure that it does not touch other parts.
B. Quickly and fully retract the RAT and make sure that it does not touch other parts.
C. Slowly and carefully extend the RAT and make sure that it does not attach to other parts.
A. 气缸盖、排气(涡轮进口)温度等能通过发动机温度系统显示。
B. 发动机温度系统包括气缸盖、排气(涡轮进口)等,用于显示发动机温度。
C. 发动机温度系统用于指示发动机不同位置的温度,包括气缸盖温度、排气(涡轮进口)温度等。
D. C.发动机温度系统用于指示发动机不同位置的温度,包括气缸盖温度、排气(涡轮进口)温度等。
A. 用真空清洁器和刷子清洁设备的内部及其底座。
B. 用真空清洁器和刷子清洁设备的外表面以及安装架。
C. 真空清洁设备及硬件设施的表面涂层。
A. 按手册将外流活门定位到全开位。
B. 外流活门的人工位置是全开位。
C. 将外流活门人工置于全开位。
A. Dry all metal parts that have different metal inserts or deep blind holes in an oven at 225 to 275°F (107 to 135°C) for a minimum of one hour.
B. Put all different metal inserts or deep blind holes metal parts in an oven at 225 to 275°F (107 to 135°C) for a maximum of one hour.
C. All metal parts that have different metal inserts or deep blind holes are dry in an oven of 225 to 275°F (107 to 135°C) for a minimum of one hour.
