A、 描述飞机发动机时,应对冷却( 散热)系统进行描述,包括整流罩盖板。
B、 描述飞机发动机时,应描述冷却( 散热)系统相关的信息,包括通风外壳。
C、 描述飞机发动机时,应描述空调系统相关的信息,包括通风罩板。
答案:A
A、 描述飞机发动机时,应对冷却( 散热)系统进行描述,包括整流罩盖板。
B、 描述飞机发动机时,应描述冷却( 散热)系统相关的信息,包括通风外壳。
C、 描述飞机发动机时,应描述空调系统相关的信息,包括通风罩板。
答案:A
A. To know what you want to say and to use the words that give the wanted meaning shall always be assured.
B. In order to express the meaning that you want,always make sure that you know what you want to say and you use the words.
C. Always make sure that you use what you want to say to express the words with the meaning that you want.
A. Apply fuel to the steel surfaces.
B. Apply oil to the alloy surfaces.
C. Apply oil to the steel surfaces.
A. 如果你看到染色,拆卸部件。
B. 如果你看到变色,更换部件。
C. 如果你看到有颜色,移除部件。
A. The dictionary includes some unapproved words that can be technical names if you can put them in the applicable technical name category.
B. Some approved words are included in the dictionary,they can be technical names if they belong to applicable technical name category.
C. The dictionary contains some unapproved words,which can be put in separate technical namecategory,they can be technical names.
D. C.The dictionary contains some unapproved words,which can be put in separate technical namecategory,they can be technical names.
A. After three full cycles,extend and retract the actuator.
B. You should extend and retract the actuator through three complete cycles.
C. Do nothing to the actuator after three complete cycles.
A. 确保舱门与其附近表面平齐。
B. 确保使用与舱门表面相似的材料对舱门进行打磨。
C. 确保舱门材料与其附近表面材料相同。
A. Obey the procedure if there is no debris in the oil sample.
B. If the fuel is not polluted,go on with the procedure.
C. If there is no contamination in the fuel sample,continue the procedure.
A. Install two mats,each 3.5 mm thick.
B. Install two spacers,each 3.5 mm thick.
C. Install two rings,each 3.5 mm thick.
A. Scientific verbs must disobey the same rules as other approved verbs in STE.
B. Technical verbs must obey the same rules as other approved verbs in STE.
C. Mechanical verbs must violate the same rules as other approve
D. v
A. Move the sensor downstream and calculate the temperature again.
B. Move the probe downstream and monitor the temperature again.
C. Move the part downstream and measure the temperature again.