2345.The exit doors used to facilitate evacuation that are not normally used for exit.Includes items such as structure,latching mechanisms,handles,insulation,lining,controls,etc.

A. Airspeed values shall be expressed in knots.

B. Airspeed values shall be expressed in nautical miles.

C. Airspeed values shall be expressed in lbs.

A. 确保标签完全贴平。

B. 确保锁扣完全扣好。

C. 确保机构完全连接。

A. 本手册提供了基本的控制和操作信息,这些信息描述飞机部件如何被控制,如何操作这些部件,以及所有特殊操作程序和操作限制。

B. 该手册提供基本控制和操作信息,描述飞机部件的生产控制工艺,包括适用的特殊生产步骤和公差值。

C. 本手册提供了基本的控制和操作信息,描述飞机部件的控制方式和工作方式,且包括所有适用的特殊程序和限制条件。

D. B.该手册提供基本控制和操作信息,描述飞机部件的生产控制工艺,包括适用的特殊生产步骤和公差值。

E. C.本手册提供了基本的控制和操作信息,描述飞机部件的控制方式和工作方式,且包括所有适用的特殊程序和限制条件。

A. 如果维护消息未在"电流状态"中显示,则出现了连续性故障。

B. 如果维护信息未在"当前状态"中显示,则出现了间歇性故障。

C. 如果维护消息未在"当前状态"中显示,则出现了次级故障。

A. If one or more blades are broken,make an entry in the engine logbook.

B. If one or more blades are in place ,make an entry in the engine logbook.

C. If one or more blades are absent,make an entry in the engine logbook.

A. 确保设备测量值与燃油箱的实际油量一致。

B. 确保表显数值与油箱加油量一致。

C. 确保仪表指示与油箱油量一致。

A. 制动系统用于降低滑行速度,以及发动机停车状态下的停止螺旋桨旋转。

B. 制动系统是用来减少停车时间或在发动机关车的情况下使螺旋桨停止转动。

C. 在发动机低速运转或螺旋桨低速旋转时,制动系统能快速刹住。

A. Because the inflation tests and material inspections can identify and condemn rafts which have more than minor installation defects,rafts which pass the tests and inspections may be in servicefor a period time with no fixed limit.

B. As the inflation tests and material inspections can affirm and declare the minor installation defects of the rafts,rafts checked by tests and inspections may come into service with no definition.

C. Rafts succeed in tests and inspections may keep the service indefinitely from a time that the inflation tests and material inspections identified and announced the rafts with many minor installation defects.

D. C.Rafts succeed in tests and inspections may keep the service indefinitely from a time that the inflation tests and material inspections identified and announced the rafts with many minor installation defects.

A. One of the safety precautions is to keep the combustible material from the work area at distance of 50ft at least.

B. One of the safety precautions is to keep the flammable material from the work area at distance of 50ft at least.

C. One of the safety precautions is to keep the combustible material from the work area at a minimum distance of 50ft.

A. Remove the 3 screws from the flap of the motor assembly.

B. Remove the 3 nuts from the flange of the motor assembly.

C. Remove the 3 screws from the flange of the motor assembly.