A、 校正空速是指经过位置调整以及仪表调整后的指示空速。
B、 校准空速指修正了仪表误差和位置误差之后得到的指示空速。
C、 校准空速是指调节位置误差以及仪表误差后的指示空速。
答案:B
A、 校正空速是指经过位置调整以及仪表调整后的指示空速。
B、 校准空速指修正了仪表误差和位置误差之后得到的指示空速。
C、 校准空速是指调节位置误差以及仪表误差后的指示空速。
答案:B
A. Adjust the frequency to the value giving in table 1.
B. Adjust the frequencyper the value given in table 1.
C. Adjust the frequency to the value given in table 1.
A. 前言内容如下:建立 CAP 方案的原因和遵循特定 CAP 需要防止的潜在问题。CAP 与产品正常检查方案的关系。
B. 前言包含下列信息:创建 CAP 项目的主要原因以及需要避免发生的根本问题。CAP 与产品例行检查方案的关系。
C. 前言部分包含以下信息:创建 CAP 程序的潜在原因以及遵循 CAP 需要避免发生的根本问题。CAP 与产品常规检查方案的关系。
D. B.前言包含下列信息:创建 CAP 项目的主要原因以及需要避免发生的根本问题。CAP 与产品例行检查方案的关系。
E. C.前言部分包含以下信息:创建 CAP 程序的潜在原因以及遵循 CAP 需要避免发生的根本
F. C.前言部分包含以下信息:创建 CAP 程序的潜在原因以及遵循 CAP 需要避免发生的根本问题。CAP 与产品常规检查方案的关系。
A. 紧握住缸体。
B. 轻轻握住圆柱体。
C. 紧握住作动筒。
A. 调整电位计,直到听不到扬声器的嗡嗡声。
B. 调试势能表,直到听不到扬声器的警报。
C. 调节电压表,直到你听不到话筒的声音。
A. Grind the surface with a soft cloth after it becomes light.
B. Rub the surface with a soft cloth when it becomes brightness.
C. Polish the surface with a soft cloth until it becomes shiny.
A. 注释会引起注意方式方法,这个能让工作更简单,或者提供说明或者注释信息的方法。
B. 注释提醒注意使工作更容易的方法,或提供说明或额外解释信息的方法。
C. 注释提醒注意使工作更容易的方法,或提供补充或解释信息的方法。
A. The paper must include a three-looking picture of the unit.
B. The report must inclue a three- view drawing of the unit.
C. The diagram must include a three-side drawing of the unit.
A. 确保压力不低于 30 磅每平方英寸。
B. 确保压力小于 30 磅每平方英寸。
C. 确保压力不高于 30 磅每平方英寸。
A. There are several steps to replace the light assembly.
B. The steps to replace the light assembly are not complicated.
C. The following steps are to change the light component.
A. 对所有维修过的产品进行全面检查。
B. 对所有维修过的产品进行仔细检查。
C. 对所有维修过的产品进行初始检查。