A、 IAS shall be monitored continuously until the end of the test.
B、 Monitor the speed indication as long as the test continues.
C、 Monitor the speed indication continuously until the end of the test.
答案:C
A、 IAS shall be monitored continuously until the end of the test.
B、 Monitor the speed indication as long as the test continues.
C、 Monitor the speed indication continuously until the end of the test.
答案:C
A. If you don't do the OVHT/FIRE test,there is no indication of single loop operation in the flight compartment.
B. If you don't do the OVHT/FIRE test,the flight compartmenthas no single loop operation.
C. No indication of single loop operation in the flight compartment as you do the OVHT/FIRE test.
A. The lean fuel flow mixtures will be provided by the EGT indicators under different engine powers.
B. EGT indicators constantly monitor the lean fuel flow mixtures wherever the thrust lever is.
C. The lean fuel flow mixtures are induced by the EGT indicators to various powerplants.
A. 在初始蒙皮的初始紧固件位置,安装埋头铆钉。
B. 在初始蒙皮的初始紧固件位置,制作埋头垫圈。
C. 使埋头垫圈适用于初始蒙皮上的初始紧固件。
A. 不要拧松螺母使其对准。
B. 不要拧紧螺母使其对齐。
C. 不要松动螺栓使其对准。
A. If the scratch does not go through the protective layer,the unit is serviceable.
B. If the nick does not go through the primary surface,the unit is serviceable.
C. If the scratch does not go through the protective surface,the unit is movable.
A. Guarantee a consistent performance of the probe.
B. Maintain an uninterrupted movement of the probe.
C. To ensure continuous movement,the probe must be kept in motion.
A. The center of gravity moves along with the weight of the wings.
B. The center of gravity moves in relation to forces applied on the wings.
C. The center of gravity moves evenly to the loads of the wings.
A. Turn the body of the closure assist assembly with a wrench to pull the two thrust reverser doors together until you can engage the latches at the bottom of the doors.
B. Turn the main body of the closing aid with a crowfoot and pull the two throttle reverser doors together until you can connect the bolts at the bottom of the door.
C. Use a wrench to turn the main body of the closing auxiliary assembly and pull the two reversedoors together until you can attach the locks at the bottom of the door.
D. C.Use a wrench to turn the main body of the closing auxiliary assembly and pull the two reversedoors together until you can attach the locks at the bottom of the door.
A. 锁住保险丝时要小心,它会伤害你的眼睛。
B. 剪保险丝时要小心,它会伤害你的眼睛。
C. 锁住电线时要小心。它会对你的眼睛造成伤害。
A. Handbooks shall be readily revisable.
B. Handbooks shall be readily available.
C. Handbooks shall be easy revisable.