A、 Information on specific optional systems or equipment may be included in this section or in Section 9,Supplementary.
B、 Information about noncompulsory systems or equipment may be included in this section or in Section 9,Supplements.
C、 Information on specific optional systems or equipment may be included in this Section or in Section 9,Supplements.
答案：C
A、 Information on specific optional systems or equipment may be included in this section or in Section 9,Supplementary.
B、 Information about noncompulsory systems or equipment may be included in this section or in Section 9,Supplements.
C、 Information on specific optional systems or equipment may be included in this Section or in Section 9,Supplements.
答案：C
A. The properties of these sealants prevent corrosion.
B. Corrosion frequently occurs due to the features of these sealants.
C. The properties of these sealants make themselves easily corroded.
A. Describe how to operate the safety belt and wire harnesses.
B. Tell the way to use the seat and shoulder belts.
C. The seat and shoulder harness should be used by the pilot.
A. By using the basic provisions of FAR 21.50,revisions become consistent with the format of the specification.
B. FAR 21.50 provisions are the basic to the revisions which are consistent with the format of the specification.
C. To make revisions consistent with the format of the specification,the provisions of FAR 21.50 should be adopted as a basis.
A. When this material comes into contact with hot surfaces,it emits hazardous fumes.
B. Contact between hot surfaces and this material results in the release of harmful heat.
C. Dangerous fumes are consumed by this material upon contact with hot surfaces.
A. Review the failures report from the logbook and related fault messages with center DU or CDU,debrief the flight crew for faults and report them for handling.
B. Either the logbook or center DU/CDU shall be checked for faults records and related fault information,then review the faults reported by the flight crew and take actions.
C. Consult the failures report from the logbook to find the related information on center DU or CDU,listen to the crew for faults report.Report faults and handle them.
A. 集气器/喷嘴环包含集气环、排气管道和加力燃烧室管道、可调喷嘴、作动筒、管路、连接装置、位置指示器、告警系统等。
B. 排气系统包含集气环、废气和推力增强管道、可调喷管、作动筒、管路、连动装置、位置指示器、告警系统等。
C. 集气器/喷嘴包含集气环、废气和推力增强管道、固定喷管、作动筒、管路、连动装置、位置指示器、告警系统等。
A. 有两种可用的编号方法。对于拥有一系列复杂系统的飞机,建议使用完整的“系统/章节”索引方法。对于小飞机或相对不复杂的飞机,可用简化的索引方法。
B. 有两种可用的编号方法。对于拥有一系列复杂系统的飞机,建议使用完整的“系统/章节”索引方法。对于小飞机或相对不复杂的飞机,可在编写索引号时用缩写的方式。
C. 有两种可用的编号方法。对于拥有复杂系统矩阵的飞机,建议使用完整的“系统/章节”索引方法。对于小飞机或相对不复杂的飞机,可在编写索引号时用缩写的方式。
D. C.有两种可用的编号方法。对于拥有复杂系统矩阵的飞机,建议使用完整的“系统/章节”索
E. C.有两种可用的编号方法。对于拥有复杂系统矩阵的飞机,建议使用完整的“系统/章节”索引方法。对于小飞机或相对不复杂的飞机,可在编写索引号时用缩写的方式。
A. When cleaning corrosion with a cleaning fluid,avoid damaging adjacent areas.
B. Avoid damaging the area around when we clean the corrosion with cleaner.
C. Use solution to clean the corroded area and prevent to damage the surroundings.
A. 发动机分析仪的功能是通过示波器等仪表或设备分析发动机性能或状态。
B. 发动机分析系统使用传感器等仪器或设备采集数据并应用于发动机性能或状态分析。
C. 发动机分析系统被用于分析发动机性能或状态,以供示波器等仪表或设备使用。
A. 噪声抑制器包含导管、隔板、屏障、推理增强装置、管路、动装置、位置指示器、警告系统等。
B. 噪声抑制装置包括诸如排气管、隔板、隔热屏、作动筒、管路、连杆、位置指示器、警告系统等部件。
C. 噪声抑制器包含导管、隔板、屏障、作动筒、管路、连动装置、分贝指示器、警告系统等。
D. B.噪声抑制装置包括诸如排气管、隔板、隔热屏、作动筒、管路、连杆、位置指示器、警告系统等部件。
E. C.噪声抑制器包含导管、隔板、屏障、作动筒、管路、连动装置、分贝指示器、警告系统等。
