A、 That section of the systems which controls the position and rotation of the trailing edge flaps.
B、 That portion of the systems which controls the position and movement of the trailing edge flaps.
C、 That part of the systems which controls the position and rotation of the flaps.
答案:B
A、 That section of the systems which controls the position and rotation of the trailing edge flaps.
B、 That portion of the systems which controls the position and movement of the trailing edge flaps.
C、 That part of the systems which controls the position and rotation of the flaps.
答案:B
A. Airline performance data shall be presented in either graphical or tabular formats.
B. Airplane performance data shall be presented in either graphical or tabular formats.
C. Airplane restriction data shall be presented in either graphical or tabular shapes.
A. 飞机交付后因进行改装而需要对《维护手册》进行修订时,由改装设计批准书持有人负责。
B. 因飞机交付后进行改装而需要对《维护手册》进行修订时,由型号设计改装批准者负责。
C. 由于飞机交付后的改装而需要对《维护手册》进行的任何修订,由改装的型号设计批准者负责。
D. C.由于飞机交付后的改装而需要对《维护手册》进行的任何修订,由改装的型号设计批准
E. C.由于飞机交付后的改装而需要对《维护手册》进行的任何修订,由改装的型号设计批准者负责。
A. Record the test results.
B. Record the check results.
C. Test the result on the record.
A. Calibrated Airspeed means according to aircraft position,after correction instrument error,the aircraft display speed.Calibrated airspeed can be achieved when aircraft in flight in sea level standard atmosphere.
B. Calibrated Airspeed means the indicated speed of an aircraft,corrected for position and instrument error.Calibrated airspeed is equal to true airspeed in standard atmosphere at sea level.
C. Calibrated Airspeed is the speed of the aircraft shown on the instrument after error correction.The calibrated airspeed is the flight altitude and speed of a real aircraft under normal atmospheric pressure.
A. 描述飞机发动机时,应描述发动机中的任何齿轮减速系统。
B. 描述飞机发动机时,应描述发动机中的任何机械减速系统。
C. 描述飞机发动机时,应描述发动机中的任何齿轮降低系统。
A. 取一个燃油样品并测量其比重。
B. 取一个燃油样品并测量其重力。
C. 取一个燃油设备并测量其比重。
A. 用一些辅助螺栓来暂时安装部件。
B. 用一些附加螺丝固定组件。
C. 用一些辅助螺丝临时组装组件。
A. Turn the handle of the door until the lower gate is lifted.
B. For lowering the upper door,door handle should be turned.
C. The lever of door should be turned until the lower door opens.
A. Tire wear increases with high speed.
B. The higher the speed is,the more fragile the tire becomes.
C. The tire blows out as the speed increases.
A. Sometimes,FAA and other airworthiness authority may accept the Continuing Airworthiness Program that uses the Specification.
B. Sometimes,we use the Specification to prepare a Continuing Airworthiness Program that will be accepted by non-FAA airworthiness authority.
C. Sometimes,during preparing a Continuing Airworthiness Program,using the Specification may be accepted by FAA and other airworthiness authority.