A、 The section of the system which is used to sense and signal the formation of ice.
B、 The portion of the system which is used to detect and display the condition of ice.
C、 The portion of the system which is used to detect and indicate the formation of ice.
答案：C
A、 The section of the system which is used to sense and signal the formation of ice.
B、 The portion of the system which is used to detect and display the condition of ice.
C、 The portion of the system which is used to detect and indicate the formation of ice.
答案：C
A. 如果发现铜颗粒,在发现之日起的 30 天内重复执行整个程序(机轮不承重)。
B. 如果发现金属碎屑,从即日起在 30 天内完成整个修理程序(机轮承重)。
C. 如果发现琥珀色指示参数,针对发现的数据在 30 天内重复所有程序(机轮离地)。
A. A lab analysis of the contamination is required to the frequently clogged filters.
B. When you find the filters blocked in a very short time,ask the vendor to inspect them for any contamination.
C. If the filters get clogged at an unusually early stage,send them to the laboratory to analyze the contamination.
A. Handbooks shall be readily revisable.
B. Handbooks shall be readily available.
C. Handbooks shall be easy revisable.
A. Choose the hydraulic system you will apply pressure.
B. Pressurize the selected hydraulic system.
C. Choose the hydraulic system you will depressurize.
A. Such tests or checks will be completed according to the conditions.
B. Such tests or checks will be very complex according to the conditions.
C. Such tests or checks will be different in complexity according to the conditions.
A. Turn the adjuster clockwise to increase 60 Deg.
B. Turn the adjuster counterclockwise in increments of 60 Deg.
C. Decrease 60 Deg.to turn the adjuster counterclockwise.
A. 每隔三天排水一次或每天使用饮用水系统一次。
B. 每三天至少排水一次或使用饮用水系统一次。
C. 最多三天就需要使用并排放饮用水系统一次。
A. If the pressure decreases quickly,the shear pins in the latch will break.
B. If the pressure reduces gradually,the shear pins in the lock will break.
C. If the pressure drops radically,the alignment pin in the lock will damages.
A. 燃油温度传感器的电阻随燃油温度的变化而变化。
B. 燃油测温包的阻抗改变燃油的温度。
C. 电感改变燃油测温灯泡的燃油温度。
A. 在制作壳体之前,确保钻头的尖端锋利。
B. 在钻孔之前,确保钻头的尖端锋利。
C. 在钻孔之前,确保电锯的尖端锋利。
