A、 Wait for the paint to dry completely before polishing it again.
B、 Do not apply the second layer of paint if the first layer has dried thoroughly.
C、 Let the first layer of paint dry fully before you apply the second layer.
答案：C
A、 Wait for the paint to dry completely before polishing it again.
B、 Do not apply the second layer of paint if the first layer has dried thoroughly.
C、 Let the first layer of paint dry fully before you apply the second layer.
答案：C
A. 如果超过 50%的污染物造成孔堵塞,则要清理显示组件背面的孔。
B. 如果污染物造成孔堵塞超过 50%,就要清洁显示组件后面的孔。
C. 如果 50%的孔被污染物堵塞,则要清理显示组件底部的孔。
A. The oil supply element and the three magnetic particle testing detectors are in the lubrication unit.
B. The oil supply filter and the three chip detectors are in the lubrication unit.
C. Position the oil supply filter assembly and the three magnetic chip detectors in the lubrication unit.
A. Any anomaly should be reported to ABC,through the Condition Reporting System,so that additions and/or revisions can be made to the CAP where deemed necessary.
B. Report any abnormality to ABC by the Condition Reporting System to verify supplement and/or revisions needed as necessary to the CAP.
C. ABC shall receive the anomalies report from the Condition Reporting System for CAP to add and/or revise as necessary.
A. The unit of all range distances shall be nautical mile.
B. We measure all range distances in accurate miles.
C. The range of distances shall be calculated in knots.
A. 液压系统包括将一定压力(包括泵、压力调节器、管路、阀门)的液压油输送到一个汇聚点(总管),再分配到用户系统的部件和组件。
B. 这些单位和组件在压力作用下将液压油输入到包括油泵、压力调节器,管路,活门等部位,最后到达一个公共地点,即分配阀,是为了再次分配到其他设定好的系统中。
C. 这些单位和组件将液压油输入到各个压力组件中,包括油泵、压力调节器,管路,活门等。后来液压油汇聚到一个通用点(分配阀),为了再分配到其他定义好的系统中。
D. C.这些单位和组件将液压油输入到各个压力组件中,包括油泵、压力调节器,管路,活门等。后来液压油汇聚到一个通用点(分配阀),为了再分配到其他定义好的系统中。
A. The Index Numbering System is described in the following paragraph.
B. The Index Numbering System is introduced in the next paragraph.
C. The Index Numbering System is compared in the later paragraph.
A. 通常,涡轮发动机转速计会以涡轮额定最大转速的百分比测量转速。
B. 涡轮发动机转速计通常会测量一个百分比转速,并与涡轮的正常最大转速比对。
C. 涡轮发动机转速计通常测量的速度与涡轮发动机最大名义转速成正比。
A. The section of the engine system which contains the turbine shafts and reduction gears.
B. The section of the engine system which contains the propeller shafts and reduction gears.
C. The section of the engine system which contains the connection shafts and reduction gears.
A. Make sure that the latch is fully engaged.
B. Make sure that the knob is fully engaged.
C. Make sure that the latch in full engaged position.
A. Several screws pulled out in front of right wing fuselage fairing.
B. Several screws lost in front of right wing fuselage fairing.
C. Forward of right wing body fairing has several loose screws.
