A、 Operation time should be recorded if the pump is in emergency .
B、 When you use the emergency pump,record the time of operation.
C、 When the pump is for emergency use,record the time of usage.
答案:B
A、 Operation time should be recorded if the pump is in emergency .
B、 When you use the emergency pump,record the time of operation.
C、 When the pump is for emergency use,record the time of usage.
答案:B
A. 如果滤子在极短的时间堵塞,送到实验室进行污染分析。
B. 如果滤子使用期间出现异常,请对污染物进行适当的检测。
C. 实验室污染分析用于防止滤子在短时间内堵塞。
A. 运营人可以使用标准的 ABC 情况报告单或者以包含相同信息的表格替代。
B. 操作者可能使用标准的 ABC 情况报告单或采用等效的信息替代。
C. 操作者会使用符合 ABC 标准的情况报单或符合同等条件的相同信息。
A. Turn the body of the closure assist assembly with a wrench to pull the two thrust reverser doors together until you can engage the latches at the bottom of the doors.
B. Turn the main body of the closing aid with a crowfoot and pull the two throttle reverser doors together until you can connect the bolts at the bottom of the door.
C. Use a wrench to turn the main body of the closing auxiliary assembly and pull the two reversedoors together until you can attach the locks at the bottom of the door.
D. C.Use a wrench to turn the main body of the closing auxiliary assembly and pull the two reversedoors together until you can attach the locks at the bottom of the door.
A. Due to the incorrect level of pressure,the system will not work.
B. As long as the fluid level remains unstable,the system will fail.
C. Because the fluid level is incorrect,the system will not operate.
A. You can combine the drains into three primary categories.
B. You can divide the drains into three primary groups.
C. Dividing the drains into three primary groups is an ill-advised option.
A. Use special crank to rotate shaft of reel assembly clockwise to unwind the harness assembly from the spool.
B. Use special handle to turn the roller of spool assembly clockwise to wind the harness assembly from the reel.
C. Use special crank to rotate the spool of reel assembly clockwise to unfold the harness assembly from the shaft.
A. 前言内容如下:建立 CAP 方案的原因和遵循特定 CAP 需要防止的潜在问题。CAP 与产品正常检查方案的关系。
B. 前言包含下列信息:创建 CAP 项目的主要原因以及需要避免发生的根本问题。CAP 与产品例行检查方案的关系。
C. 前言部分包含以下信息:创建 CAP 程序的潜在原因以及遵循 CAP 需要避免发生的根本问题。CAP 与产品常规检查方案的关系。
D. B.前言包含下列信息:创建 CAP 项目的主要原因以及需要避免发生的根本问题。CAP 与产品例行检查方案的关系。
E. C.前言部分包含以下信息:创建 CAP 程序的潜在原因以及遵循 CAP 需要避免发生的根本
F. C.前言部分包含以下信息:创建 CAP 程序的潜在原因以及遵循 CAP 需要避免发生的根本问题。CAP 与产品常规检查方案的关系。
A. The gage must be lubricated before doing a check.
B. Do a check with an adjusted gage.
C. The gage is used to do calibration during a check.
A. The total weight must be approved and the CG shall be within the limits.
B. The total weight and CG must be within the specified range.
C. Totals must be within approved weight and CG limits.
A. Examine and remove the parts that are damaged.
B. Examine the removed parts with damage.
C. Examine the removed parts for damage.