A、 Make sure that all the emergency exits are clear of unwanted objects.
B、 Make sure that all the exits are clear of foreign objects.
C、 Make sure that all the emergency entrance are freee of unwanted objects.
答案:A
A、 Make sure that all the emergency exits are clear of unwanted objects.
B、 Make sure that all the exits are clear of foreign objects.
C、 Make sure that all the emergency entrance are freee of unwanted objects.
答案:A
A. 如果使用折页,折叠时页码必须可见。
B. 如果扉页被折叠,页码必须可以看见。
C. 当页面被折起,折叠页上可能会看到使用的编号。
A. 空中模式设定 30 秒后飞行开始。
B. 飞行开始 30 秒后可以进入空中模式。
C. 当探测到空中模式超过 30 秒,飞行开始。
A. 确保气流不低于 10 升/分钟。
B. 确保空气流量为 10 升/分钟。
C. 确保气流不超过 10 升/分钟。
A. 编写本 CAP 旨在扩大现有的检查要求,以进一步保证飞机在初始认证范围内的性能。
B. 本 CAP 准备延伸目前的检查要求,以更远地保证飞机在初始认证极限内的性能能力。
C. 准备本 CAP 的要求是想要加强现有的检查,作为飞机在原认证范围内执行能力的更好保证。
A. This Specification is designed to provide guidance for the development of Handbooks for all types of general aviation airplanes.These airplanes are originally certificated at minimum takeoff weights of 12,500 pounds or more.
B. This specification is intended to provide guidance for the development of Handbooks for all types of general aviation aircraft,which are initially certificated at maximum takeoff weights of 12,500 pounds or less.
C. This specification is intended to provide guidance for the preparation of Handbooks.For all types of general aviation aircraft,their maximum take-off weight is more than 12,500 pounds.
A. The aft lanyard attached to the access door to the right APU compartment is broken.
B. The after end of lanyard attached to the access door to the right APU compartment is fractured.
C. The lanyard attached to the after end of the right access door to the APU compartment is frayed.
A. Lubricate the engine and its accessories with the same brand.
B. Lubricants for the engine and the auxiliary equipment are the same.
C. The engine and the additional devices are greased in a same manner.
A. 起落架是用来封闭起落架舱门的结构。如果门是作为一个整体结构,那么其内容可以仅在第 32 章中写出。
B. 起落架是门的结构,收起时被封闭在起落架舱内。如果门被做成一个完整结构,它们可以仅在第 32 章显示。
C. 起落架是门的结构,被用于装进起落架舱内。如果门是一个完整结构,它们可以仅在第32 章展示。
A. These must be shown on the wiring diagram under some specific conditions and wires are colour coded.
B. Wires are coded in color in certain condition and these should be marked on the wiring diagram.
C. In some cases,wires are color coded and these should be indicated on the wiring diagram.
A. Get approval for all modifications from the design authority.
B. The design department is irresponsible for approving the changes.
C. The arrangement has to be approved by the design department.