A、 Turn the adjuster clockwise to make the display brighter.
B、 Turn the adjuster clockwise to make the display dimmer.
C、 Adjust the brightness of the display by turning the adjuster.
答案:A
A、 Turn the adjuster clockwise to make the display brighter.
B、 Turn the adjuster clockwise to make the display dimmer.
C、 Adjust the brightness of the display by turning the adjuster.
答案:A
A. There is no influence on your eyes for hydraulic fluid.
B. Hydraulic fluid has no effect on your eyes.
C. Hydraulic fluid can cause eye injury.
A. The charged resister acts as a primary battery.
B. The discharged resister acts as a secondary battery.
C. The charged capacitor behaves as a secondary battery.
A. Do not fuel the aircraft if the flight deck displays an engine overhead warning.
B. Do not refuel the aircraft if an engine overheat warning is displayed on the flight deck.
C. Do not replenish the aircraft if the flight deck displays an engine overheat warning.
A. 油箱释压活门在 85-90psi 之间打开以保护油箱不会超压。
B. 为保护管路不会超压,释压活门在 85-90psi 之间打开。
C. 选择活门在 85-90psi 之间打开以保护油箱正常工作。
A. 使用危险品时穿上防护服。
B. 使用溶剂时穿上防护服。
C. 使用易感染物品时穿上防护服。
A. Preset the control to get maximum thrust.
B. Set the control to get maximum thrust.
C. Reset the control to get the maximum force .
A. Loosen the cross nuts [10] on reducer [7] and standby valve [8] on each end of air pressure filter assembly [1].
B. Loosen the swivel nuts [10] on reducer [7] and bypass valve [8] on each end of air pressure filter assembly [1].
C. Loosen the cotter nuts [10] on reducer [7] and bypass valve [8] on each end of air pressure filter assembly [1].
A. 在需要折叠的页面上,折叠时不允许页码可见。
B. 在需要折叠的页面上,以允许页码可见的方式折叠。
C. 在需要折叠的页面上,以这样的态度来折叠,并保证页码可变。
A. The AFDSmonitorsthree separate autopilot channels and a single Mode Control Panel(MCP)
B. The AFDSconstitutes three separate autopilot channels and a single Mode Control Panel(MCP)
C. The AFDS contains three separate autopilot channels and a single Mode Control Panel(MCP)
A. 如果杠杆锁定电磁阀在锁定位置失效,你可以移动起落架控制杆到向上的位置与并用杠杆锁定覆盖触发器。触发器缩回控制杆向前的部分,这样它可以清除杠杆锁定机制。
B. 如果起落架控制手柄锁电磁阀在锁定位出现故障,可通过手柄锁超控触发器将控制手柄移动到向上位置。触发器将控制手柄的前半部分收回,这样就解除了手柄的锁定装置。
C. 如果杠杆锁定电磁阀没有处于锁定位置,则在手柄锁定超控触发器情况下将起落架控制手柄移动到向上位置。 触发器将控制杆的前部缩回,从而解除控制杆锁定机制。
D. C.如果杠杆锁定电磁阀没有处于锁定位置,则在手柄锁定超控触发器情况下将起落架控制手柄移动到向上位置。 触发器将控制杆的前部缩回,从而解除控制杆锁定机制。