A、 Proper recipe shall be adopted to measure the pressure.
B、 The pressure shall be estimated by using accurate equation.
C、 Calculate the pressure with the applicable formula.
答案:C
A、 Proper recipe shall be adopted to measure the pressure.
B、 The pressure shall be estimated by using accurate equation.
C、 Calculate the pressure with the applicable formula.
答案:C
A. Slowly and fully extend the RAT and make sure that it does not touch other parts.
B. Quickly and fully retract the RAT and make sure that it does not touch other parts.
C. Slowly and carefully extend the RAT and make sure that it does not attach to other parts.
A. 需要作为安装或恢复作动程序中的一部分的任何调整/测试应在文本中按适当的顺序进行操作。
B. 需要作为安装或限动程序中的一部分的任何调整/测试应以适当的方式包含在文本中。
C. 需要作为安装或恢复作动程序中的一部分的任何调整/测试应以适当的顺序包含在文本中。
D. C.需要作为安装或恢复作动程序中的一部分的任何调整/测试应以适当的顺序包含在文本中。
A. 尽管建议使用阴影、双向阴影、屏蔽或相似的方法,使用颜色也是允许的。
B. 虽然建议使用阴影、交叉阴影、筛选或类似的方法,但使用颜色是允许的。
C. 虽然建议使用阴影、剖面线、筛选技巧或类似的方法,但使用颜色是允许的。
A. 用净水清洗内表面。
B. 用温水清洗外表面。
C. 用冷水清洗外表面。
A. The System/Chapter,sub-System/Section and Subject Number,the page number and date of issue will disappear in the lower left-hand corner, on the left-hand pages and the review date in the lower right-hand corner.
B. The System/Chapter,sub-System/Section andSubject Number,the pagenumberand dateofissue will appear in the lowerleft-handcorner,ontheleft-hand pagesandthe reviewdate inthelowerright-handcorner.
C. The System/Chapter,sub-System/Section andSubject Number,the pagenumberand dateofpublicwillappearinthe lowerleft-handcorner,ontheleft-hand pagesandtherevision dateinthelowerright-handcorner.
A. It supersedes the preceding edition.
B. It updates the previous version.
C. It takes place of the following version.
A. 航空器拖动和滑行时任何可能遇到的情况的说明在”拖动与滑行”这个标题下。
B. 航空器在任何可能遇到的情况下如何拖动和滑行的说明在”拖动与滑行”这个标题下。
C. 航空器应该服从什么样的条件进行滑行和拖动的说明在”拖动与滑行”这个标题下。
A. 液压系统的主要压力用于飞行控制系统。
B. 飞行控制运行所需的压力来源于起主要作用的液压系统。
C. 液压系统的主要功能是为飞行控制系统的操作提供压力。
A. If the wheel temperature reaches as high as 177 deg.,the core of safety plug shears off and the tire slips.
B. If the wheel temperature increases to more than 177 deg.,the core of the fusible plug melts and the tire deflates.
C. The core of the filter element melts once the wheel temperature is above 177 deg.,causing the tire to deflate.
A. Do the weighing procedure in this sequence.
B. In this order to perform the swapping procedure.
C. In this sequence to do the analysis procedure.