2961.如需更改维修方案,应获得设计部门的批准。

A. Move it lightly and make it through the hole

B. Move it slightly to make it aim at the hole

C. Move it gently to make it enter the hole

A. Each wire is comprised by an alphabetical code following 2 alpha digits and 2 numerical digits.

B. Each wire is identified by an alphanumerical code comprising 2 alpha digits followed by 2 numerical digits.

C. Each wire consists of an alphanumerical code following 2 alpha digits and 2 numerical digits.

A. When showing a low flow or not sufficient cooling condition,the low flow sensor produces an alarm signal of the flight compartment for warning.

B. When a low flow or under cooling condition occurs,the low flow sensor provides an alarm signal to the cabin compartment for alert.

C. When a low flow or not sufficient cooling condition occurs,the low flow sensor supplies an alarm signal to the flight compartment for annunciation.

A. Make sure that the cables are bent.

B. Make sure that there is tension in the cables.

C. Make sure that there are twists in the cables.

A. If the repair scheme must be changed,the approval of the design authority is hardly got.

B. If the design authority need change the repair scheme,it can get the approval.

C. If it is necessary to change the repair scheme,get the approval of the design authority.

A. Light L4 illuminates within 5 seconds.

B. Light L4 comes on after 5 seconds.

C. Light L4 comes on 5 seconds before.

A. 图 2 是受损织物的修复过程示例。

B. 图 2 举出了两个受损网络的修复过程。

C. 图 2 是损坏网页的修复程序示例。

A. 为了使句子简短不要增加太多名词。

B. 为了使句子简短不要忽略名词。

C. 不要为了使句子简短而省略名词。

A. 用密封剂填充补片及相邻结构之间的缝隙。

B. 用密封剂填充补片的缝隙,并粘接相邻结构。

C. 在附近的密封结构和补片之间留出空隙。

A. The Design Authority is responsible for approving and changing the repair procedure.

B. Any alteration to this repair procedure must get verbal approval of the Design Authority.

C. If you change this repair procedure,get approval of the Design Authority.