A、 Setting cable tension,flight control surfaces travel limitsand stops are the main tasks of rigging.
B、 Cable tension set,flight controls travel limits adjustment and travel stops set are the rigging procedures.
C、 Rigging involves setting cable tension,adjusting travel limits of flight controls,and setting travel stops.
答案:C
A、 Setting cable tension,flight control surfaces travel limitsand stops are the main tasks of rigging.
B、 Cable tension set,flight controls travel limits adjustment and travel stops set are the rigging procedures.
C、 Rigging involves setting cable tension,adjusting travel limits of flight controls,and setting travel stops.
答案:C
A. Check whether the linkage moves slightly or not.
B. Examine the linkage for smooth movement.
C. Inspect the status of the linkage movement.
A. “涡轮进口温度表”是一种温度显示系统,可显示发动机涡轮部分的气体温度。
B. “涡轮进口温度表”是一种温度感知系统,可显示发动机进气口的气体温度。
C. “涡轮进口温度表”是一种测量发动机涡轮部分燃气温度的系统。
A. After pressing the LSK next to EXIT,the BITE will take you out of BITE test and the airplane will return to its normal condition.
B. The BITE will continue the BITE test and the airplane will go back to its usual condition when you push the LSK next to EXIT.
C. The BITE will proceed the BITE test and the airplane will go back to its normal configuration after releasing the LSK that is adjacent to EXIT.
A. 冷却系统可以在客舱控制以提供冷却空气。
B. 冷却系统提供冷却空气控制客舱温度。
C. 冷却系统及其控制为客舱提供冷却空气。
A. 计算热电偶温度计上的摄氏读数。
B. 校准热电偶温度计至华氏刻度。
C. 将温度计校准到摄氏刻度。
A. 隔离液压系统之前,做勤务。
B. 在勤务液压系统之前,将其隔离。
C. 在增压液压系统之前,先将其隔离。
A. A brush is cleaned by the filter element.
B. The filter element and a brush are clean.
C. Use a brush to clean the filter element.
A. 调节的精度可以改变。
B. 调整后的精度可能会改变。
C. 调节的程序可以改变。
A. 如果电瓶需要断电,则断掉电源。
B. 如果电瓶需要充电,则继续接通电源。
C. 如果需要更换电瓶,则接通电源。
A. Airspeed values shall be expressed in knots.
B. Airspeed values shall be expressed in nautical miles.
C. Airspeed values shall be expressed in lbs.