A、 Verify that the bleed air of the ground car can not lead to a wrong information.
B、 Make sure that the exhaust from the ground cart does not cause an incorrect indication.
C、 Make sure that the wrong indication is caused by the exhaust from the ground cart.
答案:B
A、 Verify that the bleed air of the ground car can not lead to a wrong information.
B、 Make sure that the exhaust from the ground cart does not cause an incorrect indication.
C、 Make sure that the wrong indication is caused by the exhaust from the ground cart.
答案:B
A. The base of the rectangle is 5 cm.
B. The height of the triangle is 5 cm.
C. The base of the triangle is 5 cm.
A. 25 章”应急设备“标题写的是应急程序中要求携带的设备。如果疏散设备、救生筏和救生艇、急救箱、着陆照明灯和信号灯、疏散信号系统等物品是制造商指定的标准设备,则它们属于这类设备。但灭火器、氧气设备或氧气面罩不属于应急设备。
B. 25 章”应急设备“标题写的是应急程序中要求携带的设备。如果作为制造商指定的标准设备而提供,则包括疏散设备、救生筏和救生艇、急救箱、着陆灯和信号灯、疏散信号系统等物品。不包括灭火器、氧气设备或口罩。
C. 25 章”应急设备“标题写的是应急程序中要求携带的设备。如果疏散设备、救生筏和救生衣、急救箱、着陆照明弹和信号弹、疏散信号系统等物品是制造商指定的标准设备,则上述设备也属于应急设备。但灭火器、氧气设备或氧气面罩不属于应急设备。
A. Inspect the fairing completely.
B. Do a detailed visual inspection of the fairing.
C. Inspect the whole fairing.
A. 对 2 号发动机进行维修。
B. 对 2 号发动机进行改装。
C. 对 2 号发动机进行大修。
A. Make sure that the indicated value is correct.
B. Make sure that the value shown on the controller is right.
C. Make sure that the value shown on the indicator is correct.
A. The lean fuel flow mixtures will be provided by the EGT indicators under different engine powers.
B. EGT indicators constantly monitor the lean fuel flow mixtures wherever the thrust lever is.
C. The lean fuel flow mixtures are induced by the EGT indicators to various powerplants.
A. Do not refuel the aircraft during maintenance.
B. Do not defuel the aircraft in the period of maintenance.
C. Stop refueling the aircraft before maintenance.
A. 驾驶舱从左侧空调组件获得空调空气,并在总管里混合。
B. 驾驶舱从左侧空调组件和混气总管获得空调空气。
C. 驾驶舱从左侧空调组件和混合总管获得增压空气。
A. 转动凸轮以使显示器松脱。
B. 转动旋钮使显示消失。
C. 转动把手以使显示器不再显示。
A. With the aid of the component manufacturer,all components in this chapter can be overhauled in any workshops with different qualifications.
B. Without the data supplied by the component manufacturer,it is possible for the most qualified shop to overhaul any components included in this chapter.
C. You must overhaul any or all components in this chapter in an eligible shop on the basis of data provided by the component manufacturer.