2859.Format and layout is to be determined by the CAP producer,recognizing that it is desirable that the format and layout be similar to the producer's existing documents.

A. Suggested Fuel Conservation Information shall be incorporated into this section to show the pilot how to reduce the fuel usage to a minimum.

B. In order to show the pilot how to take full advantage of fuel during operation of the airplane,Suggested Fuel Conservation Information shall be merged into this section.

C. Approved Fuel Conservation Information shall be merged into this section so as to show the pilot the fuel usage during operation of the airplane.

A. Manufacturers' recommended time limits,maintenance checks and inspections (both planned and unplanned) are arranged in Chapter 5.

B. Manufacturers' recommended time limits,maintenance checks and tests (both scheduled and unscheduled) are arranged in Chapter 5.

C. Manufacturers' recommended time limits,maintenance checks and inspections (both scheduled and unscheduled) are arranged in Chapter 5.

A. The horizontal bar goes out of view.

B. The vertical bar goes out of view.

C. The horizontal bar disappears suddenly.

A. The forward movement of the control lever must be slow and continuous.

B. The control lever must be kept moving forward slowly and abruptly.

C. You must continuously slow down the forward movement of the control lever .

A. Manufacturer determines specific range properly to describe sophisticated and professional information.The information can be put in Maintenance Maunal or other documents.

B. Detailed information on more intricate and specific subjects can be written in two ways: Maintenance Manual or individual documents.The two ways are dependent on manufacturer's option properly.

C. It is up to the manufacturer to decide where and to what extent to include detailed information about more sophisticated and professional topics,either in the common Maintenance Manual or in another new documents.

A. Prior to and aft use the tool / equipment,the user shall make a visual check or operational test to confirm the utility.

B. Before or after using the tool / equipment,the user shall make a visual check or functional test to confirm the serviceability.

C. Before or aft of using the tool / equipment,the user shall make a spot check or functional test to inform the usability.

A. 使用通用工具密封端口。

B. 使用指定的工具封严开口。

C. 端口可以使用特殊的工具封严。

A. Fill the outer tank before you fill the inner tank.

B. Fill the inner tank before you fill the outer tank.

C. Fill the inboard tank before you drain the overboard tank.

A. The power plant refers to the overall power package,including engine,air intake,bracket,cowling,nacelle,cowl flaps,cooling baffles,etc.

B. The power plant refers to the overall power package inclusive of engine,air intake,mount,cowling,scoops,cowl flaps,cooling baffles,etc.

C. The power plant refers to the overall power package inclusive of engine,air intake,mount,cowling,nacelle caps,fairing flaps,cooling baffles,etc.

A. The shock absorber is a telescopic oleo-pneumatic unit.

B. The shock absorber is a flexible hydraulic-pneumatic unit.

C. The shock strut is an elastic oil-air unit.