A、 Theseairworthiness directives provide detailed information about continued airworthiness requirements for the manufacturer and owner/operator.
B、 These service bulletins provide detailed information regarding continued airworthiness requirements for the manufacturer and owner/operator.
C、 These advisory circulars provide specific information regarding continued airworthiness requirements for the manufacturer and owner/operator.
答案：C
A、 Theseairworthiness directives provide detailed information about continued airworthiness requirements for the manufacturer and owner/operator.
B、 These service bulletins provide detailed information regarding continued airworthiness requirements for the manufacturer and owner/operator.
C、 These advisory circulars provide specific information regarding continued airworthiness requirements for the manufacturer and owner/operator.
答案：C
A. It is not permit to work with any uncontrolled technical document for maintenance work.
B. It is not permitted to work with any uncontrolled technical document for maintenance work.
C. It is not allowed to work with anyunreliable technical documentfor maintenance work.
A. 可以通过拆下保护盖来接近机械装置。
B. 重新安装保护盖来接近机械装置。
C. 拆下保护盖来获得机器。
A. In the STE example,this safety description is given as a caution,but if you know about oxygen systems,you also know that oxygen can occur explosions.
B. In the non-STE example,this safety instruction is given as a caution,but if you know about oxygen systems,you also know that oxygen can cause explosions.
C. In the non-STE example,caution is given in this safety description.But if you know about nitrogen systems,you also know that nitrogen can cause flames.
A. 将备件送到修理厂。
B. 将零件送至大修商店。
C. 将部件送到大修车间。
A. 如果微型开关不可用,则起动作动筒以防止损坏活门。
B. 如果微型开关不可用,则执行作动筒的限动程序以防止损坏活门。
C. 如果微型开关适用,为了防止损坏活门对作动筒执行拆下的步骤。
A. 在左边空白处用黑色垂直线或用“手形指示”来标记确定插图的修改部分。
B. 用与修改部分相对的左边空白处的黑色垂直线或用“手形指示”来确定插图的修改。
C. 用左边空白处的黑色水平方向直线或用“手形指示”来确定插图的修改。
A. 从地板护盖上去除剩余的密封胶。
B. 保留地板护盖上残存的溶剂。
C. 去除地板护盖上剩余的溶剂。
A. Instead of starting each program at the top of a new page,procedures should be prepared in chapter numbering sequence,with appropriate primary and secondary headings.
B. Each Chapter of the procedure shall be prepared in reference number order with appropriate,hierarchical headings.The beginning of a new section of the procedure does not need to start a new page.
C. Procedures shall be prepared in reference number sequence within each Chapter with proper major and minor subject heads,without the necessity of each procedure starting at the top of a new page.
A. 增加化合物的热量可以使愈合过程变慢。
B. 为了使固化过程变慢,降低对化合物加热的温度。
C. 为了加速固化过程,减少施加到化合物的热量。
A. The revision dates need to be displayed at each revision location.
B. The revision date needs to be displayed in an obvious place.
C. The revision date should be displayed on every revision page.
