A、 Generally speaking,there are separate arrangements and chapter breakdown in each manual,full unification is difficult to achieve.
B、 In general,it is mandatory for all manuals to be uniform and follow chapter arrangements and breakdown to the maximum extent.
C、 In general,it is desired that the following chapter arrangements and breakdown be followed uniformly and to the maximum extent practicable in all manuals.
答案：C
A、 Generally speaking,there are separate arrangements and chapter breakdown in each manual,full unification is difficult to achieve.
B、 In general,it is mandatory for all manuals to be uniform and follow chapter arrangements and breakdown to the maximum extent.
C、 In general,it is desired that the following chapter arrangements and breakdown be followed uniformly and to the maximum extent practicable in all manuals.
答案：C
A. Modifications,additions and omissions,a black line should be drawn vertically at the footer outside of the page parallel to the part of the change.
B. Revisions,additions and deletions shall be identified by a vertical black line along the outside of the page opposite only that portion of the printed matter that was changed.
C. Alterations,substitutions and eliminates should be marked with a black slash outside the scope of the page to coincide with the section being changed.
A. The air conditioning cooling system supplies cooled air to the cabin.Includes items such as the cooling unit,indicating systems related to the cooler operation,etc.
B. The air conditioning cooling system supplies cold air to the passenger cabin.Includes items such as the cooling unit,indicating systems related to the cooler operation,etc.
C. The air conditioning cooling system supplies cooled air to the passenger cabin.Includes items such as the cooling pack,indicating systems related to the cooler operation,etc.
A. 陀螺仪将在大约 15 秒后变得稳定。
B. 地球仪将在大约 15 秒后变得稳定。
C. 地球仪将在大约 15 秒后变得稳定。
A. The space equipment releases the air from the compound.
B. The vacuum equipment decreases the air from the compound.
C. The vacuum equipment removes the air from the compound.
A. 感应管内的气压使有故障的压力电门处于关闭位置。当该气压在过热或火警状况时,其它 2 个压力电门关闭。
B. 感应管内的气压保持故障压力电门处于关闭位置。当该气压由于过热或火警状况增加时,其它 2 个压力电门关闭。
C. 气压在感应管内保持不变,故障压力电门处于关闭位置。其它 2 个压力电门关闭时,气压出现过热或者火警情况。
D. C.气压在感应管内保持不变,故障压力电门处于关闭位置。其它 2 个压力电门关闭时,气压出现过热或者火警情况。
A. The vendor can build programs to supply response to worthless conditions found in compliance with regulations.
B. The manufacturer may establish procedures to provide feedback on unairworthy conditions that were discovered when complying.
C. The manufacturer may create a process to give feedback on abnormal conditions when it's conformed.
A. Solenoid switches shall indicate whether the valve is solenoid-loaded to the open or closed positon.
B. Electromagnetic valves shall include a marking indicating whether the valve is coil-loaded to the open or closed positon.
C. Solenoid valves shall include a notation indicating whether the valve is spring-loaded to the open or closed positon.
A. Place the repaired board carefully in the damaged place.
B. Place the repair form directly above the damage.
C. Put the repair sheet accurately on the damaged area.
A. 有些功能不存在。
B. 有些功能不可用。
C. 有些系统不可用。
A. If the repair scheme must be changed,the approval of the design authority is hardly got.
B. If the design authority need change the repair scheme,it can get the approval.
C. If it is necessary to change the repair scheme,get the approval of the design authority.
