Find the damaged areas.

A. 对现有的分析进行了审查，以确定可能存在安全裕度较低的部件和区域。

B. 从分析结果发现，有部件和相关区域显示出安全性能较低的迹象。

C. 故障分析结果显示，某些部件和区域现有些安全指标达不到设计要求。

A. 原理图的使用者是维修人员。

B. 工作图纸的使用者是维修人员。

C. 原理图用于机械专业。

A. Push the applicable button to eject the disk drive.

B. Press the applicable key to pop out the tape actuator.

C. Compress the applicable button to jet the disk actuator.

A. Fuel sample was checked for contamination of microorganism.

B. Contamination to microorganism was detected in the fuel sample.

C. Fuel sample check reveals positive contamination of microorganism growth.

A. The data may be supplemented by brief descriptions of additional characteristics or features if desired.

B. If necessary, the detail may supplement some simple descriptions of additional characteristics or properties.

C. If desired, the data may be added by simple presentations of additional values or properties.

A. Do the tightening procedure.

B. Do the loosening procedure.

C. Do the strengthening procedure.

A. The table is referred to follow the applicable torque values.

B. The applicable torque values are used to obey the table.

C. See the table below for the applicable torque values.

A. Before restarting the engine, make sure to clear the ground from any fuel spills.

B. Remove all spilled fuel from the ground before making the first attempt to start the engine.

C. Ensure that no fuel on the ground is eliminated before proceeding with engine startup.

A. 如果超过50%的污染物造成孔堵塞，则要清理显示组件背面的孔。

B. 如果污染物造成孔堵塞超过 50%，就要清洁显示组件后面的孔。

C. 如果50%的孔被污染物堵塞，则要清理显示组件底部的孔。

A. If possible, do an engine ground run to make sure that you get the same indications.

B. If possible, run the engine on the ground to confirm that you get similar indications.

C. In order to verify the instructions, engine run-up should be possibly conducted on the ground.