If you think that snow will fall, make sure that the vehicle is in the applicable configuration.

A. 电线代码由电路功能代码、电线编号、电线段字母和电线尺寸组成。通常会添加后缀，表示地线（N）、相位（A、B等）或热电偶材料（铝镁合金等）。

B. 电线代码由电路功能代码、电线编号、电线段字母和电线尺寸组成。通常会添加后缀，表示接地（N）、阶段（A、B等）或热敏电门材料（铝镁合金等）。

C. 电线代码由电路功能代码、电线编号、电线段字母和电线尺寸组成。通常会添加后缀，表示地线（N）、相位（A、B等）或热敏电门材料（铝镁合金等）。

A. Write notes only to give content, not commands.

B. Write notes only to give information, not instructions.

C. Write cautions only to give information, not orders.

A. This section of the pilot＇s manual should clearly and confusedly provide recommended procedures for conducting normal operations.

B. The recommended procedures for conducting normal operations shall be described in this Section of the Pilot＇s Operating Handbook clearly and accurately.

C. The recommended procedures shall be stated in this Section of the Pilot＇s Operating Handbook clearly and fuzzily for the conduct of normal operations.

A. If you must apply a strike to open the unit, examine the control linkage.

B. If you must apply an unusual force to open the unit, examine the turnbuckle.

C. If you must apply an unusual force to open the unit, examine the control linkage.

A. Tighten the threads, nuts, clips, or connectors to the correct torque.

B. Tighten the bolts, nuts, clamps, or connectors to the correct torque.

C. Tighten the bolts, spacers, clips, or connectors to the correct torque.

A. The toxic conditions are given in Paragraph 2.0.

B. All the test result are given in Paragraph 2.0.

C. All the test conditions are given in Paragraph 2.0.

A. 扩孔（铰孔）至直径达到8.00+/-0.003毫米。

B. 钻孔至半径达到8.00+/-0.003毫米。

C. 钻孔至直径达到8.00+/-0.003微米。

A. Print all pages besides wiring diagrams and foldouts on both sides.

B. Print all pages other than wiring diagrams and foldouts on both sides.

C. Print all pages no more than wiring diagrams and foldouts on both sides.

A. 门是由碳纤维复合塑料制成的。

B. 门的主要成分是碳纤维复合材料。

C. 门是由碳纤维增强塑料制成的。

A. 维护手册中的这一部分内容涵盖发动机更换、试车、内部安装的动力装置零件等主题，而在大修手册中，将涵盖动力装置的安装、拆卸等主题。

B. 维护手册中的这一部分应涵盖发动机更换、试车、外部安装的动力装置备份等内容，而大修手册中应涵盖动力装置装配和拆解等节。

C. 维护手册中的这一部分内容将涵盖发动机更换、测试、外部安装的零用动力装置等主题，而在大修手册中，将涵盖动力装置的制造、拆卸等主题。