Reassemble the part if the overlap is more than 0.1 mm.

A. The section of the engine system which contains the turbine shafts and reduction gears.

B. The section of the engine system which contains the propeller shafts and reduction gears.

C. The section of the engine system which contains the connection shafts and reduction gears.

A. The Boeing-777 airplanes are different from the previous Boeing series ones mainly in that they are flown by wires.

B. The difference between the Boeing-777 airplanes and the subsequent Boeing series is that they are operated by wires.

C. Fly-by-wire is the main difference between Boeing-777 airplanes and the subsequent Boeing series.

A. 在容易腐蚀的区域投入使用复合材料来阻止腐蚀过程。

B. 在受影响的区域投入使用防腐化合物来阻止腐蚀进程。

C. 在被影响的区域投入使用防腐化合物来彻底阻止腐蚀。

A. 变更一些词性的缩写，使其与标准缩写一致。

B. 一些词性缩写的变化与标准缩写一致。

C. 更新标准缩写使其满足一些词性缩写变更的要求。

A. 本文件中的任何零件没有出版商的许可不得复制。

B. 本文件中没有任何一个部分是没有得到出版商书面许可的。

C. 未经出版商书面许可， 本文件任何部分不得以任何形式复制。

A. Put the bell crank and shaft with identification to prevent improper installation.

B. Identify the bell crank and shaft with marks to prevent wrong installation.

C. Put the bell crank and shaft with identification to prevent wrong installation.

A. The CAP compiler should determine the format and layout, it is desirable that the format and layout should be similar to the compiler＇s current documents.

B. The format and layout should be determined by the CAP producer, it is intended that the format and layout shall be similar to the producer＇s existing files.

C. The format and layout should be determined by the CAP producer, recognized that it is desirable the format and layout should be the same as the producer＇s existing documentaries.

A. 把飞机推回到原来的位置。

B. 将飞机恢复到通常状态

C. 把飞机向后推到原来的位置。

A. The spoilers are similar to the ailerons in that they are assisting and providing control of the airplane about the longitudinal axis.

B. The ailerons are similar to the spoilers in that they are resisting and providing control of the airplane about the longitudinal axis.

C. The ailerons are similar to the spoilers in that they are resisting and providing control of the airplane about the roll axis.

A. Evaluate the impedance between the antenna baseplate and the airplane skin.

B. Record the measured resistance between the antenna baseplate and the airplane skin.

C. Perform the measurement of the resistance between the antenna baseplate and the airplane skin.