This data module tells you how to operate the unit.

A. The manufacturer may set up steps and feedback the airworthy conditions discovered when complying.

B. The manufacturer may establish procedures to provide feedback on unairworthy conditions that were discovered when complying.

C. The manufacturer may establish procedures and comply regulations to provide feedback on unairworthy conditions.

A. 当飞机处于常态速度和巡航仰角时, 通气油箱内的燃油将排放到主燃油箱内。

B. 当飞机处于恒定速度和巡航俯仰角时, 通气油箱内的燃油将排放到主燃油箱内。

C. 当飞机处于超常速度和巡航俯仰时, 通气油箱内的燃油将排空到主燃油箱内。

A. 将线路穿过线槽顶部。

B. 将天线穿过基座顶部。

C. 将天线穿过插槽顶部。

A. 如果杠杆锁定电磁阀在锁定位置失效，你可以移动起落架控制杆到向上的位置与并用杠杆锁定覆盖触发器。触发器缩回控制杆向前的部分，这样它可以清除杠杆锁定机制。

B. 如果起落架控制手柄锁电磁阀在锁定位出现故障，可通过手柄锁超控触发器将控制手柄移动到向上位置。触发器将控制手柄的前半部分收回，这样就解除了手柄的锁定装置。

C. 如果杠杆锁定电磁阀没有处于锁定位置，则在手柄锁定超控触发器情况下将起落架控制手柄移动到向上位置。 触发器将控制杆的前部缩回，从而解除控制杆锁定机制。

A. Do not install 0.1 mm thick shims.

B. Do not install shims which are more than 0.1 deep.

C. Do not install shims that are more than 0.1 mm thick.

A. Find appropriate torque values in the table above.

B. Refer to the table that follows for the applicable torque values.

C. Proper torque values can be found in the booklet attached.

A. 调整加速度计的精度。

B. 准确调整陀螺仪。

C. 调整罗盘的精度。

A. Evaluate the impedance between the antenna baseplate and the airplane skin.

B. Record the measured resistance between the antenna baseplate and the airplane skin.

C. Perform the measurement of the resistance between the antenna baseplate and the airplane skin.

A. Do a hardness test for turning tool.

B. Conduct a hardness test for the carbide insert.

C. Take a hardness test for the chuck.

A. 通常，涡轮发动机转速计会以涡轮额定最大转速的百分比测量转速。

B. 涡轮发动机转速计通常会测量一个百分比转速，并与涡轮的正常最大转速比对。

C. 涡轮发动机转速计通常测量的速度与涡轮发动机最大名义转速成正比。