A、 仔细检查组件来确定是否有进一步的损坏。
B、 目视检查组件来确定损坏的部位。
C、 目视检查组件来确定损坏的程度。
答案:C
A、 仔细检查组件来确定是否有进一步的损坏。
B、 目视检查组件来确定损坏的部位。
C、 目视检查组件来确定损坏的程度。
答案:C
A. Use the marks on the bellcrank and shaft to identify them and prevent incorrect installation.
B. Mark the bellcrank and shaft so that they'll be identified and incorrect installation will not occur.
C. Put marks on the bellcrank and shaft or incorrect installation will occur.
A. 发动机动力是系统中直接或间接表示动力或推力的部分,包括刹车平均有效压力、压力比、每分钟转数等项目。
B. 发动机动力系统能够直接或间接指示功率或推力,包括平均有效压力、压比、转速(RPM)等。
C. 发动机动力系统通过刹车平均有效压力、压力比、每分钟转数等项目,来直接或间接表示动力或推力。
A. That portion of the system is responsible for the fuel storage components in the system, comprising of storage tank, bag battery, ventilation system, battery and storage tank interconnection device, neck and cover of the wing filler, etc.
B. That portion of the system is used to store fuel, including integral tank sealing, bladder type cells, ventilating system, cell and tank interconnectors, over wing filler necks and caps, etc.
C. A portion in a system can store fuel. Covering storage tank sealing, bag battery, ventilation system, battery and storage tank interconnection device, overhead neck and cover of the wing filler, etc.
A. Be careful not to get acid on your skin.
B. Prohibit not to get acid on your skin.
C. Be careful not to get alcohol on your skin.
A. 增加化合物的热量可以使愈合过程变慢。
B. 为了使固化过程变慢,降低对化合物加热的温度。
C. 为了加速固化过程,减少施加到化合物的热量。
A. 应提供描述可能出现的故障、如何识别这些故障以及这些故障的补救措施的故障排除信息。
B. 提供的排故信息应描述可能出现的故障、如何识别相关故障以及相应的补救措施。
C. 应提供描述可能出现的故障、如何识别这些故障以及补救措施的排除信息。
A. 确保L和R PACK开关在P5-10空调面板上显示OFF位。
B. 确保P5-10空调面板上的L和R PACK开关处于OFF位置。
C. 确保P5-10面板上的L和R PACK在OFF位时,空调按钮在关闭位。
A. 齿轮箱是一个包含齿轮系和轴的箱体。
B. 齿轮箱包含了齿轮火车和曲轴。
C. 有一类齿轮箱包含了齿轮组和轴。
A. 使用“降低”更好,因为它描述的是压力,而不是控制压力的指示器 。
B. 使用“降低”更好,因为它描述的是压力,而不是监测压力的指示器。
C. 使用“增加”更好,因为它描述的是压力,而不是监测压力的指示器。
A. The slats shall be retracted to ensure that the aileron trim handwheel is in the initial position.
B. Be sure to retract the flaps and keep the rudder trim handwheel in the original position.
C. Make sure that the flaps are retracted and the aileron trim handwheel is in the zero position.