A、 执行此步骤需要两个人。
B、 两个人来做这个工卡是必须的。
C、 最少需要两个人来做这个工作。
答案:A
A、 执行此步骤需要两个人。
B、 两个人来做这个工卡是必须的。
C、 最少需要两个人来做这个工作。
答案:A
A. Pressurization of the pneumatic crossover manifold and use of an external air source connected to the air charging valve manifold to pressurize the reservoirs for ground maintenance is the second method.
B. You can use the second method to pressurize crossover manifold and use an external air source connected to the air charging valve manifold to pressurize the reservoirs for ground maintenance.
C. The second method is that it is not necessary to pressurize the pneumatic crossover manifold but to use an external air source connected to the air charging valve manifold to pressurize the reservoirs for ground maintenance.
A. Each revision and the effective page should be logged in the logbook.
B. Only the effective revisions pages need to be recorded in the manual.
C. Each manual shall have a record of revisions or effective pages.
A. 始终保持液晶显示器在最大亮度。
B. 在液晶显示器上,最大限度保持亮度是可控的。
C. 始终保持液晶显示器的亮度处于最小状态。
A. This compound can eliminate poisonous fumes.
B. This compound can release poisonous fumes.
C. This composite alloy can release poisonous fumes.
A. 如果飞机上某个泵出现重复故障,那么可以通过此程序将壳体回油管、壳体回油软管或壳体回油软管快卸接头中的残渣冲洗掉。
B. 如果飞机上某个泵在一处出现故障,可以将壳体回油管,壳体回油软管或壳体回油软管快卸接头中的残渣清洗掉以完成此程序。
C. 如果飞机上某个泵在一处出现重复故障,说明在壳体回油管,壳体回油软管或壳体回油软管快卸接头中存在无法通过此程序清洗干净的残渣。
A. 如果无法听到警告声,需调整音量控制器。
B. 调整音量控制器可能导致警告声过于响亮。
C. 调整音量控制器可能使警告声变得更加嘈杂。
A. 需要对车辆以及随车配置的牵引杆和牵引钢索进行牵引。
B. 需要牵引车、牵引杆、牵引钢索等。
C. 需要牵引车、牵引杆、牵引线束等牵引设备。
A. Turn the dimming knob and find out the intensity of the light changes.
B. Press the light exchange switch to observe the change of light intensity.
C. Operate the dimmer switch and make sure that the intensity of the light changes.
A. 对于活塞式发动机,向发动机输送计量燃油和空气的装置和部件。燃油部分包括化油器、从进气侧到排气喷口的主控、喷油泵、化油器、喷油嘴和启动喷油装置。
B. 对于往复式发动机,向发动机输送燃料和燃气的装置和部件。燃料部分包括从出气侧到排气喷嘴、喷油泵、化油器、喷油嘴和燃油底火的化油器控制。
C. 对于往复式发动机,向发动机输送燃料和空气的装置和部件。燃料部分不包括从进气侧到排气喷嘴、喷油泵、化油器、喷油嘴和燃油底火的化油器控制。
A. 如果发现铜颗粒, 在发现之日起的30天内重复执行整个程序(机轮不承重)。
B. 如果发现金属碎屑,从即日起在30天内完成整个修理程序(机轮承重)。
C. 如果发现琥珀色指示参数,针对发现的数据在30天内重复所有程序(机轮离地)。