MAKE SURE THAT THE TOILET ASSEMBLY FLUSHES CORRECTLY.

A. 只有主要的变更高高挂起来了。

B. 仅突出显示了主要的变更。

C. 只显示了大部分的变更。

A. The Specification provides flexibility in Handbook preparation based on the complexity of the airplane while maintaining a high degree of standardization of arrangement, definitions, and performance information.

B. The Specification provides flexibility in Handbook preparation based on the complicacy of the airplane, but ignoring a high degree of standardization of structure, definitions, and performance information.

C. The Specification provides uniformity in Handbook preparation based on the simplicity of the airplane while retaining a high degree of standardization of arrangement, definitions, and performance information.

A. 工作准备总是第一个步骤，收尾或收工是最后一个步骤是

B. 工作准备总是第一个步骤，收尾或收工是接下来的步骤

C. 第一个步骤有时是工作准备，收尾或收工是接下来的步骤

A. ATA chapter is indicated by a pair of the digits of the first fault code.

B. ATA chapter is indicated by latest pair of the digits of the fault code.

C. The first pair of the digits of fault code indicates the applicable ATA chapter.

A. Tire wear increases with high speed.

B. The higher the speed is, the more fragile the tire becomes.

C. The tire blows out as the speed increases.

A. The basis for assuring an airplane remains airworthy and safe to operate is to combine the manufacturer＇s requirements with sound inspection and maintenance practices.

B. To ensure airworthiness and safe operation of an airplane, it is essential to follow the manufacturer＇s instructions in the utilization of airplane, and perform sound inspection and maintenance practices as well.

C. Airworthiness and safe operation are fundamental to aircraft utilization as required by the manufacturer, so sound inspection and maintenance practices are carried out.

A. Use special crank to rotate shaft of reel assembly clockwise to unwind the harness assembly from the spool.

B. Use special handle to turn the roller of spool assembly clockwise to wind the harness assembly from the reel.

C. Use special crank to rotate the spool of reel assembly clockwise to unfold the harness assembly from the shaft.

A. 用标签识别拆下的零件，此方法将有助于随后的装配过程。

B. 保存好拆下标签的零件，此方法将有助于随后的装配过程。

C. 用标签识别拆下的零件，此方法将有助于子部件的安装。

A. 压力管路分布在不同方位。

B. 压力管路往不同方向分开。

C. 压力管路的排布方向各有不同。

A. 小心修理损伤的零件。

B. 小心易损伤的零件。

C. 对于损伤的零件要小心。