A、 在室温固化密封胶。
B、 恒温固化密封胶。
C、 常温下确保密封胶固化。
答案:B
A、 在室温固化密封胶。
B、 恒温固化密封胶。
C、 常温下确保密封胶固化。
答案:B
A. 如果你发现低于正常数量的空气从桅杆排出,做系统功能测试。
B. 如果你发现从通风口桅杆排出的空气量不正常,做系统测试。
C. 如果你发现不寻常的空气量从主排气口排出,做功能测试。
A. Those units and components provide for external and internal illumination such as landing lights, taxi lights, position lights, rotating lights, ice lights, cabin warning lights, passenger reading and cabin dome lights, etc.
B. Those units and components provide for external and internal illumination such as landing lights, taxi lights, position lights, rotating lights, ice lights, master warning lights, passenger reading and cabin dome lights, etc.
C. Those units and components provide for external and internal illumination such as landing lights, taxi lights, navigation, position indicating, ice lights, master warning lights, passenger reading and cabin floor lights, etc.
A. 找出液压油渗漏的源头。
B. 找出滑油溢出的源头。
C. 找出燃油泄漏的源头。
A. 在修订文件时,应提供修订页和相关的有效列表。
B. 在修改基本文件时,应提供相应的修订页面和相关的有效页面列表。
C. 当修改基本文件时,应尽可能提供适当的修改页面和有关的有效页面清单。
A. 如果没有液压动力放下前起落架,起落架的重量和气流会将其推至放下位。
B. 如果液压动力未将前起落架放下,起落架的重量和重力会将其放下。
C. 液压动力可以放下前起落架,起落架的重量和气流也可以将其推至放下位。
A. 航空器停留和系留时任何可能遇到的情况的说明在”停留和系留”这个标题下。
B. 航空器在任何可能遇到的情况下如何停留和系留的说明在”停留和系留”这个标题下。
C. 航空器应该服从什么样的条件来停留和系留的说明在”停留和系留”这个标题下。
A. 饮用水/非饮用水系统包括洗手池、饮水机组件、水箱、阀门等(如适用)。
B. 洗涤子系统包括洗手池、马桶组件、水箱、阀门等(如适用)。
C. 水/废水子系统包括洗手池、卫生间组件、水箱、阀门等(如适用)。
A. Remove the smooth areas with cotton cloth if you find them.
B. If you find alligatored areas, remove them with cotton cloth.
C. If there are rough areas, remove them with emery cloth.
A. For normal operations, make sure the pressure relief valve is closed. An open pressure relief valve is a symptom of a problem in the fuel vent system.
B. For normal operations, make sure the shutoff relief valve works. If you open pressure relief valve, that indicates a problem in the fuel vent system.
C. For normal operations, make sure you close the pressure relief valve. If you leave it open, a problem will be shown in the fuel vent system.
A. 所有发行物应使用统一的编号系统进行索引从而进行主题事项分配。
B. 所有出版物应使用标准编号系统进行索引和主题事项分配。
C. 所有发行物应使用标准的编号索引系统来完成主题事项分配。