A、 机身站位360处的地板梁有低度腐蚀(长2英寸,直径1英寸)。
B、 机身站位360处的地板梁有重度腐蚀(长2英寸,半径1英寸)。
C、 机身站位360处的地板梁有中度腐蚀(长2英寸,直径1英寸)。
答案:C
A、 机身站位360处的地板梁有低度腐蚀(长2英寸,直径1英寸)。
B、 机身站位360处的地板梁有重度腐蚀(长2英寸,半径1英寸)。
C、 机身站位360处的地板梁有中度腐蚀(长2英寸,直径1英寸)。
答案:C
A. 通过活门的流体必须是可见的。
B. 通过活门的油液必须是透明的。
C. 通过活门的流体必须是连续的。
A. The brackets should be connected to the nearest components.
B. Align the brackets with the adjacent components.
C. Keep the brackets engaged with the nearby components.
A. 每本手册都应有一份“飞机称重表格”,其中包括飞机剖面图,显示称重点的位置(使用顶升点或起落架)。
B. “飞机称重表格”应包含在每本手册中,其中包括飞机平面图,显示称重点相对基准线的位置(使用顶升点或底盘)。
C. 每本手册都应有一份“飞机称重表格”,其中包括飞机侧视图,显示称重点相对基准线的位置(使用顶升点或起落架)。
A. 确保你移除了所有的工具和设备。
B. 确保你移动了所有的工具和器材。
C. 确保你报废了所有的工装。
A. 这部分系统被用来控制空气中的湿度,控制臭氧含量,从空调空气中去除放射性污染物,并对空气应用除氧剂、净化器等。
B. 系统的这个部分被用于控制空气中的颗粒,控制区域聚集度,过滤空调空气中活跃的无线电波,并在合适的时候对空气用除氧剂和杀虫剂等处理。
C. 系统的这部分被用于控制空气中的水分,控制臭氧浓度,过滤空调空气中的放射性碎屑,并在适用时使用除臭剂、杀虫剂等处理空气。
A. “重大的检查条件”用于描述裂纹检查时的最小尺寸以及其他检查条件时的磨损极限、腐蚀坑深度等。
B. “重大的检查项目”用于描述裂纹检查时可检测到的最小裂纹尺寸以及其他检查项,如磨损极限、腐蚀坑深度等。
C. “重大的检查状况”用于描述裂纹检查中预期发现的最小尺寸。对于其他检查条件,指定磨损极限和腐蚀坑深度等
A. 如果温度降到零度,开启排放水系统。
B. 如果温度下降到低于零,请拆卸水系统。
C. 如果温度降至零度以下,则将水系统排空。
A. Those units and components include alcohol pump, valves, alcohol container, propeller anti-icing system, wing warmers, water line warmers, pitot warmers, scoop warmers, windshield wipers and the electrical anti-icing and heated air ice control. Does not include the basic windshield panel.
B. Those units and components include alcohol pump, valves, tanks, propeller anti-icing system, wing heaters, water line heaters, pitot heaters, scoop heaters, windshield wipers and the electrical and heated air portion of windshield ice control. Does not include the basic windshield panel.
C. Those units and components include alcohol pump, valves, tanks, propeller anti-icing system, wing heaters, plumbing heaters, air speed tube heaters, intake heaters, windshield wipers and the electrical and heated air ice control for windshield. Does not include the basic windshield panel.
A. The safety procedures are supplied by the manufacturer.
B. Safety procedures are to be supplied to the manufacturer.
C. Safety procedures are provided for manufacturers to follow.
A. On the label, read the date of the last inspection.
B. Check the date of latest inspection on the log.
C. On the label, make sure the date of last check.