A、 如果是活页表,使用“标准”或通用的页面布局。
B、 如果发现松动的页面,使用“标准”或通用的装订页。
C、 如果是活页形式,使用“标准”或常用的页面大小。
答案:C
A、 如果是活页表,使用“标准”或通用的页面布局。
B、 如果发现松动的页面,使用“标准”或通用的装订页。
C、 如果是活页形式,使用“标准”或常用的页面大小。
答案:C
A. If the error is more than 3 degrees, calibrate the glide slope.
B. If the error is more than 3 degrees, calibrate the compass.
C. If the error is more than 3 degrees, calibrate the gyroscope.
A. 为了从表格里提取准确的性能值,需要在中位数之间挑选。
B. 为了从表中获得准确的性能值,需要在增量值之间插值。
C. 为了从表中获取准确的性能值,需要评估增长的中间值。
A. Turn the dimming knob and find out the intensity of the light changes.
B. Press the light exchange switch to observe the change of light intensity.
C. Operate the dimmer switch and make sure that the intensity of the light changes.
A. 发动机附件冷却系统用于发动机舱及附件通风,包括阀门、管路、引射泵、涡流发生器等部件。
B. 发动机辅助冷却系统能帮助发动机及附件通风,包括阀门、波导设备、喷射泵、扰流器等组件。
C. 发动机辅助冷却系统用于发动机舱、活门、管路、引射泵、涡流发生器等附件通风。
A. 当飞机离地时,最小的千斤顶的高度必须小于接头和地面之间的距离。
B. 给飞机安装轮子时,千斤顶的最低闭合高度不能超过顶块和地面之间的距离。
C. 在顶起飞机之前,最小的顶升高度必须小于顶块和地面之间的距离。
A. Use a fan to suck the gases.
B. Use a turbine fan to remove the gases.
C. Use a fan to remove the gases.
A. 裂缝的最大长度为5英尺。
B. 裂缝的最大长度为5英寸。
C. 裂缝的最大深度为5英寸。
A. Horsepower Radius and Engine Revolving Speed
B. Horsepower Ratings and Propeller Rotational Speed
C. Horsepower Values and Propeller Turning Speed
A. 如果你不能脱开杆的位置,新杆的长度很可能需要调节。
B. 如果你不能断开杆和活塞,可能量错了新杆的长度。
C. 如果你不能接合杆和活塞,新杆的长度可能是不正确的。
A. A blocked oil jet cannot enhance performance.
B. Incorrect operation is caused by a blocked oil tank.
C. A blocked oil jet can cause incorrect operation.