A、 告诉一个人撤除轮挡。
B、 告诉A撤除轮挡。
C、 告诉一个人去拆卸机轮。
答案:B
A、 告诉一个人撤除轮挡。
B、 告诉A撤除轮挡。
C、 告诉一个人去拆卸机轮。
答案:B
A. 如果活门过早开启,停止测试。
B. 如果活门已经开启,停止测试。
C. 如果活门的开启时机未到,停止测试。
A. Do not extend or retract landing gear above this speed.
B. Do not expand or retract landing gear at this speed.
C. Do not put down or retract landing gear by more than this speed.
A. 这些灯和电门用来指示运行和螺旋桨系统激活。
B. 这些灯和电门用于指示螺旋桨系统的运行或启动状态。
C. 这些灯和电门用于指示螺旋桨运行或系统激活。
A. 防腐剂可能存在于腐蚀严重的部位。
B. 腐蚀敏感的部位可以安装防腐组件。
C. 易受腐蚀的部位可能有防腐剂。
A. The total weight must be approved and the CG shall be within the limits.
B. The total weight and CG must be within the specified range.
C. Totals must be within approved weight and CG limits.
A. 发动机防冰系统能消除和防止因引气产生的发动机部件结冰(不包括整流罩),包含活门、管路、调节器等零件。
B. 发动机防冰系统包括活门、管路、调节器等部件,能通过引气消除和预防发动机所有部件结冰(不包括整流罩)。
C. 发动机防冰系统是用于消除和防止发动机所有部件结冰的系统部分(不包括整流罩),包括活门、管路、调节器等项目。
A. Spread a thin layer of sealing compound with a brush on the surface of the bare metal.
B. Spray a thin layer of sealing compound on the metal sheet.
C. Apply a thin layer of sealant on the bare metal.
A. Check the defect before you start the procedure again.
B. Rectify the defect before you start the procedure again.
C. Define the defect before you start the procedure again.
A. 对所有维修过的产品进行全面检查。
B. 对所有维修过的产品进行仔细检查。
C. 对所有维修过的产品进行初始检查。
A. Drain the used oil into a container.
B. Pump the used oil into a container.
C. Suck the used oil into a container.