Move the probe upstream and monitor the temperature again.

A. 用标签识别拆下的零件，此方法将有助于随后的装配过程。

B. 保存好拆下标签的零件，此方法将有助于随后的装配过程。

C. 用标签识别拆下的零件，此方法将有助于子部件的安装。

A. Horsepower Radius and Engine Revolving Speed

B. Horsepower Ratings and Propeller Rotational Speed

C. Horsepower Values and Propeller Turning Speed

A. Use the upper latch mechanism to lock the lower display unit in the middle.

B. The latch mechanism at the top is used to secure the center display unit on the bottom.

C. The center lower display unit is installed with the latch mechanism at the top.

A. 慢慢地拧动活门。

B. 慢慢地转动叶片。

C. 慢慢地松开电门。

A. In these conditions, removal of the squibs from the fire extinguisher bottle is appropriate.

B. It is dangerous to remove the cartridges from the fire extinguisher bottle except under these conditions.

C. In these conditions, it is dangerous to remove the cartridges from the fire extinguisher bottle.

A. If the unit is not modified, its service life will be possibly shorter.

B. Without the modification of the unit, its service life is likely shorter than present.

C. Without the modification, it is possible that the service life of this unit will be shorter than usual.

A. 给连接在上述部件的锁控装置喷上防腐蚀剂。

B. 给连接在上述部件的锁控装置喷上防锈剂。

C. 给连接在上述部件的锁控装置喷上润滑剂。

A. The system interface circuits control the physical properties of the connected systems.

B. The system interface circuits adapt to the physical properties of the connected systems.

C. The physical configuration of the connected systems defies the behavior of the system interface circuits.

A. 缠紧卷轴上的发条。

B. 将胶带缠绕在卷筒上。

C. 将胶带粘贴在线圈上。

A. 到达行程末端后作动筒中的微小电门会衔接。

B. 在旅程结束后作动筒中的微小电门会断开。

C. 到达行程末端后作动筒中的微动电门断开。