A、 Measure the movement of the inboard and outboard flaps.
B、 Measure the movement of the onboard and outboard slats.
C、 Operate the movement of the inboard and outboard ailerons.
答案:A
A、 Measure the movement of the inboard and outboard flaps.
B、 Measure the movement of the onboard and outboard slats.
C、 Operate the movement of the inboard and outboard ailerons.
答案:A
A. Those units means that they can prevent it from eroding.
B. Those units provide a method of deicing.
C. Those units provide a way to prevent the formation of ice.
A. Instead of starting each program at the top of a new page, procedures should be prepared in chapter numbering sequence, with appropriate primary and secondary headings.
B. Each Chapter of the procedure shall be prepared in reference number order with appropriate, hierarchical headings. The beginning of a new section of the procedure does not need to start a new page.
C. Procedures shall be prepared in reference number sequence within each Chapter with proper major and minor subject heads, without the necessity of each procedure starting at the top of a new page.
A. AIRBORNE AUXILIARY POWER UNITS are those power plants (engines) built-in on the aircraft for creating and supplying power in a single type or combination of auxiliary electric, hydraulic, pneumatic or other power.
B. AIRBORNE AUXILIARY POWER UNITS are those units (engines) that are suspended on the aircraft for bringing and providing power in a single manner or combination of auxiliary electrical, hydraulic, pneumatic, or other power.
C. AIRBORNE AUXILIARY POWER UNITS are those airborne power plants (engines) which are installed on the aircraft for the purpose of generating and supplying a single type or combination of auxiliary electric, hydraulic, pneumatic or other power.
A. For line maintenance carried out at a line station of an organization which is located outside the Community territory, the certifying staff may be qualified in accordance with the national aviation regulations of the State in which the line station is ba
B. For line maintenance organization located outside the Community territory, the certified staff may be qualified in accordance with the national aviation regulations of the State in which the line station is based.
C. For maintenance organization whose line station is located outside the Community territory, the releasing staff may be audited in accordance with the aviation regulations of the its State.
A. Ground Control depicts minimum diameter of turning for taxiing and ground operation.
B. Ground Control describes minimum radius of turn for taxiing and ground handling.
C. The least radius of turn for taxiing and ground maneuver is described in Ground Control.
A. Airline performance data shall be presented in either graphical or tabular formats.
B. Airplane performance data shall be presented in either graphical or tabular formats.
C. Airplane restriction data shall be presented in either graphical or tabular shapes.
A. 可以理解的是,在某些情况下,遵守上述规定会导致重复测试程序,这是可以接受的。
B. 为了符合上述程序,有时会导致进行重复测试,这是可以接受的。
C. 可以理解为,符合上述要求就会导致接受重复测试程序。
A. 灯只会在300节速度下亮起。
B. 在超过300节的速度时,灯会亮起。
C. 在大约300节的时候灯就会亮。
A. When a low flow or undercooling condition occurs, the low flow sensor sends an alarm signal to the flight compartment for warning.
B. When a low flow or not sufficient cooling condition occurs, the low flow sensor supplies an alarm signal to the flight compartment for annunciation.
C. When a low flow or insufficient cooling condition occurs, the low flow sensor applies a alarm signal to the flight compartment for caution.
A. 描述飞机起落架时,应描述减震系统。
B. 描述飞机起落架时,应描述放重装系统。
C. 描述飞机起落架时,应描述冲击避免系统。