A、 It is necessary to add fluid to the hydraulic reservoir.
B、 Drain fluid to the hydraulic reservoir as necessary.
C、 Add fluid to the hydraulic reservoir as necessary.
答案:C
A、 It is necessary to add fluid to the hydraulic reservoir.
B、 Drain fluid to the hydraulic reservoir as necessary.
C、 Add fluid to the hydraulic reservoir as necessary.
答案:C
A. 将五份缺陷报告送到工程主管部门。
B. 将五份无损报告送到发动机权威人士。
C. 将五份探测报表送到主管工程师。
A. The power source that are discussed respectively under the appropriate chapter heading shall provide power to at least two systems.
B. When two or more systems are served by a single power source, that power source will be discussed separately under the appropriate chapter heading.
C. The system that is powered by two or more power sources shall be discussed separately under the appropriate chapter heading.
A. Put the repair patch accurately on the damaged area.
B. Put the repair patch on the correct damaged area.
C. Correctly put the repair sealant on the damaged parts.
A. 操作增压的系统时会导致人员受伤。
B. 对压力系统进行工作时会导致人员受伤。
C. 增压系统会导致正在工作的人员伤亡。
A. 刹车系统阐述了如何识别故障问题以及如何处理故障。
B. 刹车系统介绍了如何判断故障问题以及如果发生故障如何处理。
C. 刹车系统解释了如何识别即将出现的问题以及如果发生故障怎么办。
A. In flight deck, once you set probe heater switches on the overhead panel automatically, all the heater lights flash.
B. Make sure probe heater switches on the overhead panel in flight deck are in AUTO position and all the heater lights illuminate.
C. Set probe heater switches on the overhead panel in cockpit in AUTO position so that all the heater lights come into view.
A. 在设计的概要图里,可能需要在让图表内容详实和便于阅读理解的简单之间妥协。
B. 在设计原理图时,可能有必要在使图不言自明所需要的细节和易于阅读和理解所必需的简单之间作出折衷。
C. 在设计插图的过程,涵盖细节来让图表自行展示且方便阅读和理解是有必要的。
A. Do not install 0.1 mm thick shims.
B. Do not install shims which are more than 0.1 deep.
C. Do not install shims that are more than 0.1 mm thick.
A. 在室温固化密封胶。
B. 恒温固化密封胶。
C. 常温下确保密封胶固化。
A. 指示器显示储压器已满。
B. 仪表显示油箱已满。
C. 指示器显示油箱已满。