手册应易于修订。

A. 控制副翼和副翼配平片位置和移动的系统部分，包括驾驶盘、钢索、增压器、连杆、操纵面、指示器等相关部件。

B. 控制副翼和副翼配平片位置和移动的系统部分，包括控制轮、电缆、助推器、连杆、控制面、指示器等相关元件。

C. 控制方向舵和襟翼位置和移动的系统部分，包括控制轮、电缆、助推器、连杆、控制面、指示器等相关元件。

A. “细节要求”部分给特殊材质的物品进行整理和排序提供特定方法。

B. “具体要求”部分描述了特殊材料的实体的一致性布局和辨别的方法。

C. “详细要求”部分提供了编排和标识特定主题材料的统一方法。

A. 计算热电偶温度计上的摄氏读数。

B. 校准热电偶温度计至华氏刻度。

C. 将温度计校准到摄氏刻度。

A. 如果最初的设置已更正，将在CDU显示器上显示“自动测试完成”。

B. 如果初始化设置正确，将在CDU显示屏上显示“自动测试进行中”。

C. 如果“自动测试正在进行”显示在CDU显示屏上则表明初始化设置正确。

A. 如果你发现了凹坑，做适用的维护程序。

B. 如果你发现了划痕，做具体的修理工作。

C. 如果你发现了裂纹，做适用的修理程序。

A. The operation of new generation aircraft has adopted the operation method of damage tolerance.

B. The damage tolerance design method is applicable to the new type aircraft.

C. The design concept of damage tolerance was successfully applied to the design of new generation aircraft.

A. The FAA-Approved Airworthiness Limitations shall be prepared as a separate document for inclusion in the Maintenance Manual and for insertion in the “Limitations Section” of the Pilot＇s Operating Handbook.

B. FAA-approved Airworthiness Restrictions should be prepared as a separate document and included in the “Restrictions Section” of the Maintenance Manual and the Pilot’s Operating Manual.

C. The airworthiness restrictions approved by FAA should be prepared as separate documents and included in the "Limitations" section of the Maintenance Manual and the "Pilot Operations Manual".

A. An internal failure in this type of switch may allow the switch to remain closed even though the toggle or button returns to the OFF position.

B. An inner fault of this kind of switch may keep the switch clogged despite the knob or pushbutton returning to the OFF position.

C. An interior loss which occurs in this type of switch, may stay closed in spite of the OFF position of the knob or button.

A. 在向系统中注入新滑油之前，强制性重置油滤。

B. 在向系统中注入新滑油之前，必须更换油滤。

C. 在系统中注入新滑油之前，建议更换过滤器。

A. Remove the magnesium drain plug from the hydraulic reservoir.

B. Replace the magnetic drain plug of the oil tank.

C. Remove the magnetic drain plug from the oil tank.