A、 Make sure that the service control unit is in the open position.
B、 Make sure that the servo control unit is in the right position.
C、 Make sure that the servo control unit is in the open position.
答案：C
A、 Make sure that the service control unit is in the open position.
B、 Make sure that the servo control unit is in the right position.
C、 Make sure that the servo control unit is in the open position.
答案：C
A. Those instructions necessary to park or store the aircraft in normal or abnormal conditions such as with engines removed, aircraft damaged, etc.neither short-term nor long-term.
B. Instructions required for parking or storing the aircraft under normal or abnormal conditions, such as engine removal, aircraft damage, etc., which are used for short-term or long-term under extreme weather conditions.
C. Those instructions necessary to park or store the aircraft in normal or abnormal conditions such as with engines removed, aircraft damaged, etc.either short-term or long-term.
A. Detection and coding systems shall be used so that it＇s easy to isolate faults, repair routes and replace the components.
B. You should use the detecting and coding system that can help to remove faults, repair lines and change the components.
C. To facilitate troubleshooting, repair of circuits, and replacement of components, an identification and coding system should be used.
A. 盘旋着陆机动指当不能或不需直线仪表进近时飞行员为使飞机对准着陆跑道所做的机动动作。在塔台管制机场，必须得到空中交通管制许可，并且建立了机场目视参照后才能做此机动。
B. 盘旋着陆机动指当不能或不需直线仪表进近时飞行员为使飞机对准着陆跑道所做的机动动作。在塔台管制机场，必须得到空中交通管制的间隔，并且建立了机场目视参照后才能做此机动。
C. 盘旋着陆机动指当不能或不需直线仪表进近时飞行员为使飞机能在着陆场矫正所做的机动动作。在塔台管制机场，必须得到空中交通管制的间隔，并且建立了机场目视参照后才能做此机动。
A. 手册中可包括其他的程序，这些程序适用于飞机操作。
B. 与飞机操作有关或必要的其他程序可包括在手册中。
C. 说明中应包括飞机操作相关或适用的其他程序。
A. Distances shown are based on weak wind.
B. Distances shown are developed with no wind.
C. Distances shown are on the basis of gentle wind.
A. The Maintenance Manual is supplied by the manufacturer at the time of aircraft delivery.
B. When delivering the aircraft, the Maintenance Manual is provided to the buyer.
C. The Maintenance Manual is prepared by the manufacturer before the aircraft is delivered.
A. 描述飞机发动机时，提供如下必要信息： 1.制造商和型号 2.发动机类型、气缸数、压气机类型等 3.额定功率 4.额定发动机转速 5.齿轮减速器，如适用 6.正常安装的附件 7.涡轮增压器或其他增益 8.限制、警告或提示。
B. 描述飞机发动机时，提供如下必要信息： 1.制造商和型号 2.发动机类型、气瓶数、压气机类型等 3.功率评定 4.发动机转速等级 5.齿轮减速，如适用 6.附件正常安装 7.增压/涡轮增压或其他增强 8.限制、警告、提示。
C. 描述飞机发动机时，提供如下必要信息： 1.制造商和型号 2.发动机类型、气缸数、压气机类型等 3.额定功率 4.额定发动机速度 5.减速齿轮，如适用 6.附件的正常安装 7.增压/涡轮增压或其他增强 8.限制、警告、提示。
A. 不要在热的表面上使用这些清洁剂。
B. 不要在热的表面上使用密封剂。
C. 不要在热的漆面上使用除味剂。
A. 如果起落架门是做为一个内部结构，它们只能显示在第32章。
B. 如果起落架门是做为一个整体结构，它们只能显示在第32章。
C. 如果作为一个内部结构，起落架门只能显示在第32章。
A. At the manufacturer＇s option, static pressure systems description and discussion may be combined with Paragraph 7.49, Pitot Pressure Systems.
B. The manufacturer could combine the description and discussion of the dynamic pressure systems in Paragraph 7.49, Pitot Pressure Systems.
C. The manufacturer decides to insert static pressure systems description and discussion into Paragraph 7.49, Pitot Pressure Systems.
