A、 The temperature value must be more than 800 kPa.
B、 The compression value must be more than 800 kPa.
C、 The pressure value must be more than 800 kPa.
答案：C
A、 The temperature value must be more than 800 kPa.
B、 The compression value must be more than 800 kPa.
C、 The pressure value must be more than 800 kPa.
答案：C
A. If the right engine stops, what position will APU servo valve stop at?
B. If the right engine is not running,what position will APU bleed valve stop at?
C. If the right engine stops, will APU servo valve stop at close position?
A. The external diameter must be concentric to the internal diameter.
B. The outer radius and the inner radius must be suitable.
C. The exterior radius must be installed on a common shaft with the interior radius.
A. 确定故障原因需要排除故障程序。
B. 执行故障排除程序以找出故障原因。
C. 根据故障排除程序，排除故障影响。
A. 制造商提供的附加信息应适当地纳入第5.37或5.41段所示的指令中。
B. 制造商应该提供适当的附加信息，这些信息在第5.3或5.41段的指令中显示出。
C. 制造商提供的附加信息应该是适当的，并便如第5.37或5.41段相关指令中。
A. Turn the canopy manually clockwise to make the pin removal process easier.
B. To make pin removal easier, manually turn the canopy in one direction and then in the other.
C. Rotate the canopy in one direction and then in the other to hinder the removal of the pin.
A. 删除某些规则，并将其概念包含在其他规则中。
B. 删除某些规则，并将其细则包含在其他规则中。
C. 删除某些尺寸，并将其概念包含在其他尺寸中。
A. Find the fueling valve switch for the tank that will get the fuel you are scheduled to transfer.
B. Find the fueling valve switch for the tank that you are scheduled to transfer.
C. Find the fueling valve switch for the tank that need to transfer fuel.
A. During engine run, the number 1 engine oil pressure watch swings.
B. During engine run, the number 1 engine oil pressure gauge fluctuates.
C. During engine run, the number 1 engine oil pressure indication moves.
A. If there is a available service bulletin to correct the problem of moisture ingress into the connector cavity,the letter then will be useless.
B. Refer to this letter to help mitigate moisture ingress into the connector cavity even if there is a available service bulletin to correct the problem.
C. If there is a available service bulletin to correct the problem that moisture ingress into the connector cavity, the letter then will provide procedures .
A. However, manufacturers may omit System/Chapters that are not applicable to the product or combine Systems/Chapters where it is feasible.
B. However, manufacturers may adopt Systems/Chapters that are not applicable to the product or constitute Systems/Chapters when necessary.
C. However, operators may omit Systems/Chapters applicable to the product or constitute Systems/Chapters where practical.
