A、 This program describes how to identify an immediate failure and how to handle a malfunction occurred.
B、 This procedure explains how to recognize impending problems and what to do if malfunctions occur.
C、 How to confirm the current problems and what should you do when malfunctions occur are described in this procedure.
答案：B
A、 This program describes how to identify an immediate failure and how to handle a malfunction occurred.
B、 This procedure explains how to recognize impending problems and what to do if malfunctions occur.
C、 How to confirm the current problems and what should you do when malfunctions occur are described in this procedure.
答案：B
A. 确保通过管路的流体没有气泡。
B. 确保通过管路的油液没有杂质。
C. 确保液压油流经管路没有阻碍。
A. A hydraulic pump operates the motor.
B. A fuel pump operates the motor.
C. A hydraulic motor operates the pump.
A. The Federal Aviation Regulations require the use of ‘maximum continuous power’, during certification of an airframe and engine combination, to show compliance with certain standards.
B. The Federal Aviation Regulations require the compliance with certain standards for an airframe and engine combination if they use ＇maximum continuous power＇ during certification.
C. The use of ‘maximum continuous power’ and the compliance with certain certification standards are required by the Federal Aviation Regulations.
A. 当使用引号的技术名称以使读者读起来更清晰时，带引号的一组单词也是适用的名词词组中的一个词。
B. 当使用连字符连接长的技术名称从而使读者读起来更清楚时，连接在一起的一组单词在相应名词词组中也算作一个词。
C. 当用冒号连接长的技术名称以使读者读起来更清楚时，冒号连接的一组单词也可以用作适用的名词词组中的一个词。
A. 为保持升降舵不动，在尾锥两侧装上木制档块。
B. 在升降舵内侧和尾锥之间放置一个木块，以防止升降舵移动。
C. 为保持升降舵不动，在尾锥两侧装上木制档块。
A. The safety procedures are supplied by the manufacturer.
B. Safety procedures are to be supplied to the manufacturer.
C. Safety procedures are provided for manufacturers to follow.
A. Bleed the hydraulic system.
B. Pressurize the hydraulic system.
C. Depressurize the hydraulic system.
A. When a low flow or undercooling condition occurs, the low flow sensor sends an alarm signal to the flight compartment for warning.
B. When a low flow or not sufficient cooling condition occurs, the low flow sensor supplies an alarm signal to the flight compartment for annunciation.
C. When a low flow or insufficient cooling condition occurs, the low flow sensor applies a alarm signal to the flight compartment for caution.
A. The word given in the approved examples is not controlled
B. The word given in the approved examples is not mandatory
C. The word given in the approved examples is not a must
A. 当施加在相同方向的压力值大于预设值时开始工作。
B. 当适用于反方向的压力值大于极限值时开始工作。
C. 当施加在反方向的压力值大于预设值时开始工作。
