A、 Check the bypass valves.
B、 Close the isolating valves.
C、 Inspect the check valves.
答案:B
A、 Check the bypass valves.
B、 Close the isolating valves.
C、 Inspect the check valves.
答案:B
A. Horsepower Radius and Engine Revolving Speed
B. Horsepower Ratings and Propeller Rotational Speed
C. Horsepower Values and Propeller Turning Speed
A. 如果燃油设备显示有游离水,请排空系统。
B. 如果燃油样本显示有多余水,请排空系统。
C. 如果燃油样本显示有游离水,请排空系统。
A. Removing it with special material is necessary if you find corrosion.
B. If you find corrosion, remove it with the specified material.
C. If corrosion is found, change the material to remove it.
A. The forward movement of the control lever must be slow and continuous.
B. The control lever must be kept moving forward slowly and abruptly.
C. You must continuously slow down the forward movement of the control lever .
A. Before you use a word, read its definition in the approved meaning column of the dictionary.
B. Before you use a word, read its approved meaning in the definition column of the dictionary.
C. Before you use a word, read its meaning in the approved column of the dictionary definition.
A. 锁住保险丝时要小心,它会伤害你的眼睛。
B. 剪保险丝时要小心,它会伤害你的眼睛。
C. 锁住电线时要小心。它会对你的眼睛造成伤害。
A. Measure the movement of the inboard and outboard flaps.
B. Measure the movement of the onboard and outboard slats.
C. Operate the movement of the inboard and outboard ailerons.
A. This section of the pilot's manual should clearly and confusedly provide recommended procedures for conducting normal operations.
B. The recommended procedures for conducting normal operations shall be described in this Section of the Pilot's Operating Handbook clearly and accurately.
C. The recommended procedures shall be stated in this Section of the Pilot's Operating Handbook clearly and fuzzily for the conduct of normal operations.
A. Crucial angle of attack is the angle at which a stream or air flow begins to split from a surface,causing a decrease in efficiency. It is important for designing dynamic surfaces ,such as airplane wings,turbine blades,as it determines the maximum attack angle that can be achieved without causing loss of lift or thrust.
B. Crutial angle of attack is the angle at which a stream or air flow begins to seperate from a surface,causing a decrease in efficiency. It is important for designing aerodynamic surfaces ,such as airplane airfoils,turbine blades,as it determines the maximum attack angle that can be achieved without causing loss of lift or thrust.
C. Critical angle of attack is the angle at which a fluid or air flow begins to separate from a surface, causing a reduction in the efficiency of the flow. The critical attack angle is an important consideration in the design of aerodynamic surfaces, such as airplane wings, turbine blades, as it determines the maximum angle of attack that can be achieved without causing a loss of lift or propulsion.
A. 燃油泵安装在隔框附近。
B. 燃油泵与隔框安装紧密。
C. 滑油滤安装在机匣附近。