将零件运输到大修车间。

A. 控制组件的出口压力值，否则它不能稳定在正确压力范围。

B. 输出控制组件的压力，该组件不能稳定在正确压力范围。

C. 控制组件出口压力值不能稳定在正确压力范围。

A. The safety procedures are provided by the operators.

B. The safety procedures are provided to the manufacturers.

C. The safety procedures are provided by the manufacturers.

A. 将气缸提升至上方位置后进行安装。

B. 将气缸的安装位置提升到上方。

C. 将气缸提升至其安装位置的上方。

A. A dash is usually longer than a hyphen but it is sometimes shown as hyphen with a space on each side.

B. A dash is usually longer than a connection symbol but it is sometimes shown as connection symbol with empty on each side.

C. A minus symbol is usually longer than a hyphen but it is sometimes shown as hyphen with a space on each side.

A. 传动轴部分包括传动轴、接头、密封圈等项目。

B. 传动轴部分由驱动轴、适配器和密封圈组成。

C. 传动轴包含了驱动柄、适配器和密封圈等部分。

A. 使用力矩扳手间隔拧紧螺栓。

B. 使用扭力扳手按顺序拧紧螺栓。

C. 使用扭矩扳手逐步拧紧螺栓。

A. Operational Tags need to be listed or made a legend.

B. Operating Placards shall be listed or illustrated.

C. Operation Instructions have to be listed or mapped out.

A. Remove the failure components.

B. Replace the damaged parts.

C. Reinstall the damaged components.

A. If the pump is not suitable to be used, replace it.

B. If the pump is outmoded, replace it.

C. If the pump malfunctions, change the location for it.

A. When the weight or torque of the aircraft change, illustrate how to keep this record in order to save the exact initial values to measure the weight and heavy center in normal flight.

B. Explain how to maintain this record when changes to the weight or moments of the airplane are made so that accurate starting data is available to calculate the weight and center of gravity during normal operation of the airplane.

C. When the changes to the mass or momentum occur, show the way to hold this record to get the beginning information easily to compute the mass and gravity core.