A、 Quickly move the throttle to the middle position.
B、 Move the throttle quickly to the idle position.
C、 Push the throttle quickly to the neutral position.
答案：B
A、 Quickly move the throttle to the middle position.
B、 Move the throttle quickly to the idle position.
C、 Push the throttle quickly to the neutral position.
答案：B
A. Spoilers are used to increase the drag of the aircraft in flight, or to interrupt lift during landing and during rejected take-off.
B. Spoilers are used to enhance aircraft resistance in flight or to disrupt boost during landing and when take-off is canceled.
C. Spoilers are used to increase the aircraft drag in flight, or destroy the lift during landing and in case of aborted take-off.
A. 显示连接点位置、转弯半径等信息的系统原理图应包含在内。
B. 显示连接点位置、转弯半径等信息的图示应包含在内。
C. 显示连接点位置、转弯半径等信息的功能图应包含在内。
A. Make sure there is no leakage of hydraulic fluid at the router.
B. Make sure there is no leakage of hydraulic fluid at the transducer.
C. Make sure there is no leakage of hydraulic fluid at the transponder.
A. The data may be supplemented by brief descriptions of additional characteristics or features if desired.
B. If necessary, the detail may supplement some simple descriptions of additional characteristics or properties.
C. If desired, the data may be added by simple presentations of additional values or properties.
A. Water above the kitchen floor can seep in through small holes in the floor surface, invisible to the naked eye.
B. Eyes cannot see the vapor which may penetrate through small holes of the floor surface in the galley.
C. Moisture above the galley floor can go through small holes in the floor surface area and stay out of view.
A. 紧急机腹着陆，如果有必要推迟，可以不成功地尝试所有其他放下起落架的方法，并选择合适的着陆区域之后再执行。
B. 如有必要进行紧急机腹着陆，应在尝试所有其他放下起落架的方法都不成功并在已选择合适的着陆区域后再执行。
C. 如果有必要推迟紧急机腹着陆，能够在所有其他放下起落架的方法尝试不成功，并选择合适的着陆区域之后再执行。
A. This document shall clearly states the minimum size crack you may discover in a crack inspection. If no minimum is defined, it shall have a statement that has the same effect.
B. This document shall specify the minimum allowed crack size expected to be discovered for a crack inspection or, if no minimum is defined, an equally valid standard.
C. The minimum crack size you are going to discover during a crack inspection shall be included in this document. However, if you could not set forth a standard, a statement shall take place.
A. A maximum distance of 50 feet is required between consumable materials and the work area.
B. Keep flammable materials at a minimum distance of 50 feet from the work area.
C. Explosive materials must be kept at least 50 feet away from the work area.
A. The test will stop when the pressure is larger than 7000 kpa.
B. Stop the test if the pressure reaches 7000 pa.
C. Stop the test when the pressure is more than 7000 kpa.
A. 冷却系统可以在客舱控制以提供冷却空气。
B. 冷却系统提供冷却空气控制客舱温度。
C. 冷却系统及其控制为客舱提供冷却空气。
