A、 Completely retract the rod slowly and ensure not to touch other components.
B、 Slowly protect the bar and guarantee not touching other parts.
C、 Slowly extend the rod fully and make sure that it does not touch other parts.
答案:C
A、 Completely retract the rod slowly and ensure not to touch other components.
B、 Slowly protect the bar and guarantee not touching other parts.
C、 Slowly extend the rod fully and make sure that it does not touch other parts.
答案:C
A. Verify that the bleed air of the ground car can not lead to a wrong information.
B. Make sure that the exhaust from the ground cart does not cause an incorrect indication.
C. Make sure that the wrong indication is caused by the exhaust from the ground cart.
A. The aim of STE is that readers all over the world can easily understand the technical texts and that writers who are responsible for preparing technical texts know how to prepare them in a easy method.
B. The objective of STE is to provide writers with general principles on how to prepare technical documents in a clear, simple and distinct manner that readers all over the world can easily understand.
C. The function of STE is to describe how to prepare technical texts in a easy, clear and specific way and to allow readers all over the world to understand difficultly.
A. Write notes only to give content, not commands.
B. Write notes only to give information, not instructions.
C. Write cautions only to give information, not orders.
A. 该程序应明确,在演示或训练识别一发不工作时的VMCA时,应从不小于VSSE的速度开始逐渐减速(约1节/秒),直至速度减小至VMCA或失速警告触发,以先到者为准。
B. 该程序应规定,为了演示或培训有意使一台发动机不工作的VMCA,应从VSSE速度开始逐渐降低速度(大约每秒1节),直到VMCA或失速警告,以先到者为准。
C. 该程序应规定,为了证明或训练VMCA的识别,故意使一台发动机不工作将速度从VSSE或以上逐渐降低(大约每秒1节),直到获得VMCA或失速警告(以先发生的为准)。
A. To give indications and test to the wing/body overheat system, 115v ac power must be connected. When installing an element, do not bend the element unless the bend radius is less than one inch. If the bend radius is less than one inch, damage to the eleme
B. For the indications and test of the wing/body overheat system, 115v ac power must be ON. When you install an element, do not bend the element until the bend radius is less than one inch. If the bend radius is less than one inch, damage to the element can
C. 115v dc power must be supplied for the indications and test of the wing/body overheat system. When you install an element, do not bend the element radius less than one inch. If you bend the radius less than one inch, damage to the element can occur.
A. 将钢索拼成三段那么高。
B. 将电缆剪成三等份那么宽。
C. 将钢索剪成等长的三段。
A. 如果你发现了划痕,执行相关工作程序。
B. 如果你发现了划痕,做具体的修理工作。
C. 如果你发现了裂纹,执行适用的修理程序。
A. 2个解算器测量燃油计量活门的位置。
B. 燃油计量活门测量2个分析仪的位置。
C. 2个分析仪定位燃油计量活门的位置。
A. 保护漆将防止腐蚀达6个月。
B. 保护涂层将防止锈蚀达6个月。
C. 保护漆将保护腐蚀达6个月。
A. Set the air conditioning switch to the up position.
B. Place an air conditioning switch above the normal position.
C. Put one of the pack switches in the HIGH position.