A、 Gives the symbols for resistors, diodes, and other parts of the system.
B、 Gives the symbols for relays, resistors, and other parts of the system.
C、 Gives the symbols for relays, diodes, and other parts of the system.
答案:C
A、 Gives the symbols for resistors, diodes, and other parts of the system.
B、 Gives the symbols for relays, resistors, and other parts of the system.
C、 Gives the symbols for relays, diodes, and other parts of the system.
答案:C
A. 确保拉力连杆不会卡住起落架。
B. 确保阻力支柱不会遮蔽起落架。
C. 确保阻力撑杆不会阻碍起落架。
A. 在《线路图手册》中,引言部分应包括每个主题下的字母索引,以帮助查找所需电路。该索引应显示系统电路所在的章节和子章节。
B. 在《线路图手册》中,引言部分应包括以主题的首字母顺序编写的索引,以帮助查找所需电路。该索引应显示系统电路所在的章节和子章节。
C. 在《线路图手册》中,引言部分应包括每个主题下的字母索引,以帮助查找所需电路。该索引应显示章节和子章节中的系统。
A. 将O形环安装在锥形轴承的内部凹槽中。
B. 将O形环安装在圆柱形轴承的中部凹槽中。
C. 将O形环安装在球形轴承的内部凹槽中。
A. 燃油系统部分还包括整体和顶油箱泄露检测及密封作用。不包括的整体或顶尖油箱及燃料电池衬板的结构,也不包括燃料流速传感、传输和/或指示。
B. 燃油系统部分既包括整体和顶部油箱泄露检测及密封,还包括整体或顶部油箱及燃料电池板的结构。但是不包括燃料流速传感、传输和/或指示。
C. 燃油系统部分还包括整体油箱和翼尖油箱泄露检测及密封。不包括整体油箱或翼尖油箱结构及软油箱结构,也不包括燃油流量传感器、传输和/或指示部件。
A. 描述飞机机翼襟翼、俯冲制动或扰流板系统时,应描述其应用如何影响俯仰姿态、空速、配平和失速速度。
B. 描述飞机机翼翼尖、俯冲制动或扰流板系统时,应描述其应用如何影响俯仰姿态、表速、配平和失速速度。
C. 描述飞机机翼襟翼、俯冲减速板或扰流板系统时,应描述各自工作时如何影响俯仰姿势、空速、配平和失速速度。
A. Make sure that the cabin differential pressure is zero before you unlock the door.
B. Be sure that the variance of the cabin pressure is zero before you open the door.
C. Make certain that the difference of the compartment compression is zero before you open the door.
A. The lower seal is invisible prior to switching the lower bearing on.
B. The lower seal becomes visible when you push the lower bearing up.
C. The lower seal comes into view when you pull the lower bearing down.
A. 如果没有任何支架损坏,则继续执行此程序。
B. 如果任意支架损坏,则继续执行此程序。
C. 如果没有任何跳开关损坏,则继续执行此程序。
A. 小心确认管路尽可能靠近探头支架的面板而不要碰到探头。
B. 小心确认接头尽可能靠近面板的天线支架而不要碰到天线。
C. 小心确认探头尽可能靠近面板的天线支架而不要碰到天线。
A. If there is a available service bulletin to correct the problem of moisture ingress into the connector cavity,the letter then will be useless.
B. Refer to this letter to help mitigate moisture ingress into the connector cavity even if there is a available service bulletin to correct the problem.
C. If there is a available service bulletin to correct the problem that moisture ingress into the connector cavity, the letter then will provide procedures .