A、 Rivets can be used to separate the two stringers.
B、 You can use two rivets to attach the stringers together.
C、 Use rivets to connect the two stringers together.
答案:C
A、 Rivets can be used to separate the two stringers.
B、 You can use two rivets to attach the stringers together.
C、 Use rivets to connect the two stringers together.
答案:C
A. 在地面上的停放点贴上胶带。
B. 在地面上通过系留点贴上警示带。
C. 将绳索通过系留点连接到地面。
A. CAP不改变或替代任何规定,而是作为飞机维修手册或服务信函的一部分。
B. 建立CAP的意图并不是要改变或取代适用的飞机维修手册或服务信函的任何部分。
C. CAP对任何不适用于飞机维修的手册或服务信函部分做更改或替代。
A. 制造商应在本节中提供一个设备列表,并以单独文件形式附在《飞行员运营手册》中,或作为单独的文件。如果设备列表未包含在本节中,说明其位置。
B. 制造商应提供一份相关设备清单,可以包含在本节中,也可以作为《飞行员操作手册》的附录,也可以作为单独的文件。设备清单未包含在本节中时,应说明其位置。
C. 制造商应在本节中提供一份设备清单,并把《飞行员操作手册》作为单独附件或单独文件。如果装备列表未包含在本节中,说明其方向。
A. 丁酮是重度除油剂,适合金属准备和编织盖板喷漆前去油。
B. 丙酮是重度油污去除剂,适合金属表面预处理和织物蒙皮喷漆前去油。
C. 异丙醇是重度油污去除剂,适合金属生产处理和织物表面喷漆前除油。
A. The operation of new generation aircraft has adopted the operation method of damage tolerance.
B. The damage tolerance design method is applicable to the new type aircraft.
C. The design concept of damage tolerance was successfully applied to the design of new generation aircraft.
A. By way of the control unit, enter the opening in the side of the tank.
B. Get access to the control unit through the opening in the side of the tank.
C. Get access to the control unit by opening one side of the tank.
A. Each manufacturer is expected to reasonably abide by the Specification content and arrangement.
B. Each manufacturer is expected to reasonably agree with the Specification content and arrangement.
C. Each manufacturer is expected to reasonably substitute the Specification content and arrangement.
A. There is no influence on your eyes for hydraulic fluid.
B. Hydraulic fluid has no effect on your eyes.
C. Hydraulic fluid can cause eye injury.
A. 打开客舱的一扇门,确保客舱不是全封闭的。
B. 打开客舱入口的一扇门,确保客舱没有增压。
C. 打开通往客舱的一扇门以保证通行没有压力。
A. Generally speaking, there are separate arrangements and chapter breakdown in each manual, full unification is difficult to achieve.
B. In general, it is mandatory for all manuals to be uniform and follow chapter arrangements and breakdown to the maximum extent.
C. In general, it is desired that the following chapter arrangements and breakdown be followed uniformly and to the maximum extent practicable in all manuals.