A、 Put the bell crank and shaft with identification to prevent improper installation.
B、 Identify the bell crank and shaft with marks to prevent wrong installation.
C、 Put the bell crank and shaft with identification to prevent wrong installation.
答案：B
A、 Put the bell crank and shaft with identification to prevent improper installation.
B、 Identify the bell crank and shaft with marks to prevent wrong installation.
C、 Put the bell crank and shaft with identification to prevent wrong installation.
答案：B
A. 格式和排版由CAP编写者决定，要认识到其格式和排版最好与编写者现有文件相似。
B. 格式和排版由CAP生产者提议，其批准需经过与现有文件格式和排版的对比。
C. 格式和排版由CAP生产者定义，并预期与现有的文件格式和排版保持一致。
A. See the graphics for information of the solenoid valves which shall contain a note indicating the position of the valve (whether spring-loaded to its open or closed position).
B. Solenoid valves indicated on the schematic shall have a notation indicating when the valve shall be spring-loaded to the open or closed position.
C. Solenoid valves shall be indicated on the schematic and shall include a notation indicating whether the valve is spring-loaded to the open or closed position.
A. Remove the 3 screws from the flap of the motor assembly.
B. Remove the 3 nuts from the flange of the motor assembly.
C. Remove the 3 screws from the flange of the motor assembly.
A. Make an estimate of the necessay quantity.
B. Make a record of the necessary quality.
C. Make a note of the necessary quality.
A. 可以理解的是，在某些情况下，遵守上述规定会导致重复测试程序，这是可以接受的。
B. 为了符合上述程序，有时会导致进行重复测试，这是可以接受的。
C. 可以理解为，符合上述要求就会导致接受重复测试程序。
A. It is forbidden to go into the engine test area with approval.
B. Entering the engine test area must not be approved.
C. Approval is a must when entering the engine test area.
A. Visually check the forward engine mount to the fan frame bolts if they are correctly installed and damaged.
B. Do a visual check of the bolts which attach the forward engine mount to the fan frame for the correct installation and damage.
C. Visually check the correct installation and damage of the forward engine mount to the fan frame bolts.
A. Use some auxiliary screws to assemble the unit temporarily.
B. You shall use some additional screws to install the unit permanently.
C. Temporarily disassemble this unit using some auxiliary screwdrivers.
A. 在某些情况下，延长检查频率可能会对疲劳检查造成不足，从长远讲会造成实际飞行小时数低于最初预测。
B. 在某些情况下，如果数据表明疲劳问题发生在比最初预测的飞行小时数更多，则可以放缓检查频率。
C. 在某些情况下，延长实际飞行小时将影响疲劳检查，因此会造成维修检查的小时数远低于最初预测。
A. Propellers must be overhauled in a satisfactory shop which should be supplied by the propeller manufacturer in accordance with data.
B. Overhaul of propellers and the shop must meet the data of the propeller manufacturer.
C. Overhaul of propellers must be accomplished in a qualified shop in accordance with data supplied by the propeller manufacturer.
